Hi Andy, The notified body is required in a few legislations without harmonised standards for certain products, such as RED. In the UK, it is now called Approved Body.
Regards, Scott On Sun, 20 Jun 2021 at 03:48, Charlie Blackham <[email protected]> wrote: > Darren > > > > The “Conformity Assessment Body” is the Notified Body (EU) of Competent > Body (UK) > > > > This advice isn’t as clearly written as it could be – that last sentence > has nothing to do with product testing or test labs > > > > Best regards > > Charlie > > > > *Charlie Blackham* > > *Sulis Consultants Ltd* > > *Tel: +44 (0)7946 624317* > > *Web: https://sulisconsultants.com/ <https://sulisconsultants.com/> * > > Registered in England and Wales, number 05466247 > > > > *From:* Darren @ Vitesses <[email protected]> > *Sent:* 19 June 2021 13:20 > *To:* Charlie Blackham <[email protected]> > *Cc:* [email protected] > *Subject:* Re: [PSES] CE Test Report for UK Compliance? > > > > Hi Charles > > Can you explain your last sentence, “ the conformity assessment bodies > that test them need to be different” > > > > From my understanding a test lab can test to mutiple country standards and > results used, ssuming its self declaration . > > > > Sent from my iPhone > > > > On 19 Jun 2021, at 12:44, Charlie Blackham <[email protected]> > wrote: > > > > Andy > > > > > some folks are asking for a UK test report > > > > Some folks are confused then 😊 > > > https://www.gov.uk/guidance/placing-manufactured-goods-on-the-market-in-great-britain > > > > *Using both the CE and UKCA marking* > > Both the CE and UKCA mark can be placed on a product so long as neither > impedes the visibility of the other and requirements of both > the GB and EU legislation are met. > > The essential requirements and standards that can be used to demonstrate > conformity with them for UKCA marked goods have not changed. That means > that if your good is currently made to the technical requirements necessary > for CE marking then it will be made to the same technical requirements that > exist for UKCA marking. However, the conformity assessment bodies that test > them may need to be different. > > Best regards > > Charlie > > > > *Charlie Blackham* > > *Sulis Consultants Ltd* > > *Tel: +44 (0)7946 624317* > > *Web: https://sulisconsultants.com/ <https://sulisconsultants.com/> * > > Registered in England and Wales, number 05466247 > > > > *From:* worldwideemc <[email protected]> > *Sent:* 18 June 2021 19:57 > *To:* [email protected] > *Subject:* Re: [PSES] CE Test Report for UK Compliance? > > > > Hi Darren, > > > > Thank you for the information. It makes sense that the CE report should be > sufficient but some folks are asking for a UK test report. I believe I'm > not the only one confused on this topic. > > > > BR, > > Andy > > > > On Fri, Jun 18, 2021 at 11:38 AM Darren @ Vitesses < > [email protected]> wrote: > > Hi Andy > > > > Yes > > If the reports show you meet the relevant standards that would be fine > > But also many international standards are the same, eg the Aus/NZS > standard has a different name but the set up and limits are identical. > > So a report to thoes standards would support a claim of compliance to the > en standards regardless of the country. > > > > I would recommend drawing up a document explaining the reasoning behind > it. > > > > Regards Darren > > Sent from my iPhone > > > > > On 18 Jun 2021, at 18:28, worldwideemc <[email protected]> wrote: > > > > Hello All, > > > > Can I use my European EMC test report to claim compliance to UK > regulations? I understand I need to generate a UKCA DoC and apply the UKCA > marking. > > > > The UK designated standards list at the link below lists EN standards > without any reference to a British Standard... > > > > > https://assets.publishing.service.gov.uk/government/uploads/system/uploads/attachment_data/file/942100/ds-0007-21-emc-notice.pdf > . > > > > Any input from the list experts would be appreciated! > > > -- > > BR, > Andy Parker > > - > ---------------------------------------------------------------- > > This message is from the IEEE Product Safety Engineering Society emc-pstc > discussion list. To post a message to the list, send your e-mail to < > [email protected]> > > All emc-pstc postings are archived and searchable on the web at: > http://www.ieee-pses.org/emc-pstc.html > > Attachments are not permitted but the IEEE PSES Online Communities site at > http://product-compliance.oc.ieee.org/ can be used for graphics (in > well-used formats), large files, etc. > > Website: http://www.ieee-pses.org/ > Instructions: http://www.ieee-pses.org/list.html (including how to > unsubscribe) <http://www.ieee-pses.org/list.html> > List rules: http://www.ieee-pses.org/listrules.html > > For help, send mail to the list administrators: > Scott Douglas <[email protected]> > Mike Cantwell <[email protected]> > > For policy questions, send mail to: > Jim Bacher <[email protected]> > David Heald <[email protected]> > > > > -- > > Regards, > Andrew Parker > > - > ---------------------------------------------------------------- > > This message is from the IEEE Product Safety Engineering Society emc-pstc > discussion list. To post a message to the list, send your e-mail to < > [email protected]> > > All emc-pstc postings are archived and searchable on the web at: > http://www.ieee-pses.org/emc-pstc.html > > Attachments are not permitted but the IEEE PSES Online Communities site at > http://product-compliance.oc.ieee.org/ can be used for graphics (in > well-used formats), large files, etc. > > Website: http://www.ieee-pses.org/ > Instructions: http://www.ieee-pses.org/list.html (including how to > unsubscribe) <http://www.ieee-pses.org/list.html> > List rules: http://www.ieee-pses.org/listrules.html > > For help, send mail to the list administrators: > Scott Douglas <[email protected]> > Mike Cantwell <[email protected]> > > For policy questions, send mail to: > Jim Bacher <[email protected]> > David Heald <[email protected]> > > - > ---------------------------------------------------------------- > > This message is from the IEEE Product Safety Engineering Society emc-pstc > discussion list. To post a message to the list, send your e-mail to < > [email protected]> > > All emc-pstc postings are archived and searchable on the web at: > http://www.ieee-pses.org/emc-pstc.html > > Attachments are not permitted but the IEEE PSES Online Communities site at > http://product-compliance.oc.ieee.org/ can be used for graphics (in > well-used formats), large files, etc. > > Website: http://www.ieee-pses.org/ > Instructions: http://www.ieee-pses.org/list.html (including how to > unsubscribe) <http://www.ieee-pses.org/list.html> > List rules: http://www.ieee-pses.org/listrules.html > > For help, send mail to the list administrators: > Scott Douglas <[email protected]> > Mike Cantwell <[email protected]> > > For policy questions, send mail to: > Jim Bacher <[email protected]> > David Heald <[email protected]> > > - > ---------------------------------------------------------------- > > This message is from the IEEE Product Safety Engineering Society emc-pstc > discussion list. To post a message to the list, send your e-mail to < > [email protected]> > > All emc-pstc postings are archived and searchable on the web at: > http://www.ieee-pses.org/emc-pstc.html > > Attachments are not permitted but the IEEE PSES Online Communities site at > http://product-compliance.oc.ieee.org/ can be used for graphics (in > well-used formats), large files, etc. > > Website: http://www.ieee-pses.org/ > Instructions: http://www.ieee-pses.org/list.html (including how to > unsubscribe) <http://www.ieee-pses.org/list.html> > List rules: http://www.ieee-pses.org/listrules.html > > For help, send mail to the list administrators: > Scott Douglas <[email protected]> > Mike Cantwell <[email protected]> > > For policy questions, send mail to: > Jim Bacher <[email protected]> > David Heald <[email protected]> > - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected]> All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc. Website: http://www.ieee-pses.org/ Instructions: http://www.ieee-pses.org/list.html (including how to unsubscribe) List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <[email protected]> Mike Cantwell <[email protected]> For policy questions, send mail to: Jim Bacher: <[email protected]> David Heald: <[email protected]>
