Hi Darren, Thank you for the information. It makes sense that the CE report should be sufficient but some folks are asking for a UK test report. I believe I'm not the only one confused on this topic.
BR, Andy On Fri, Jun 18, 2021 at 11:38 AM Darren @ Vitesses <[email protected]> wrote: > Hi Andy > > Yes > If the reports show you meet the relevant standards that would be fine > But also many international standards are the same, eg the Aus/NZS > standard has a different name but the set up and limits are identical. > So a report to thoes standards would support a claim of compliance to the > en standards regardless of the country. > > I would recommend drawing up a document explaining the reasoning behind > it. > > Regards Darren > > Sent from my iPhone > > On 18 Jun 2021, at 18:28, worldwideemc <[email protected]> wrote: > > > Hello All, > > Can I use my European EMC test report to claim compliance to UK > regulations? I understand I need to generate a UKCA DoC and apply the UKCA > marking. > > The UK designated standards list at the link below lists EN standards > without any reference to a British Standard... > > > https://assets.publishing.service.gov.uk/government/uploads/system/uploads/attachment_data/file/942100/ds-0007-21-emc-notice.pdf > . > > Any input from the list experts would be appreciated! > > -- > BR, > Andy Parker > - > ---------------------------------------------------------------- > > This message is from the IEEE Product Safety Engineering Society emc-pstc > discussion list. To post a message to the list, send your e-mail to < > [email protected]> > > All emc-pstc postings are archived and searchable on the web at: > http://www.ieee-pses.org/emc-pstc.html > > Attachments are not permitted but the IEEE PSES Online Communities site at > http://product-compliance.oc.ieee.org/ can be used for graphics (in > well-used formats), large files, etc. > > Website: http://www.ieee-pses.org/ > Instructions: http://www.ieee-pses.org/list.html (including how to > unsubscribe) <http://www.ieee-pses.org/list.html> > List rules: http://www.ieee-pses.org/listrules.html > > For help, send mail to the list administrators: > Scott Douglas <[email protected]> > Mike Cantwell <[email protected]> > > For policy questions, send mail to: > Jim Bacher <[email protected]> > David Heald <[email protected]> > > -- Regards, Andrew Parker - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected]> All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc. Website: http://www.ieee-pses.org/ Instructions: http://www.ieee-pses.org/list.html (including how to unsubscribe) List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <[email protected]> Mike Cantwell <[email protected]> For policy questions, send mail to: Jim Bacher: <[email protected]> David Heald: <[email protected]>
