> Second question, while you're here. The Elecraft K2 page says > CT logging software works with the K2 (and apparently with > the K3). CT doesn't list any Elecraft radios as far as I can > see. Is there another radio selection that works well with > the K2/3? During the DX contest last week I couldn't make it > play with the radio in any way I found helpful.
Based on a comparison of the command sets, choose one of the "late model" Kenwood settings ... e.g., TS-450/850/950, 570/870, 480 or 2000. Earlier Kenwood models use a different format for VFO/Split selection and reporting. 73, ... Joe, W4TV > -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] On Behalf Of Joel R. Hallas > Sent: Saturday, March 08, 2008 5:02 PM > To: [email protected] > Subject: [Elecraft] k3; Firmware and Config Utility? > > > Dear K3ers, > > Perhaps I'm missing something, but in Wayne's firmware update > note yesterday he said: > > "We also suggest installing the latest version of our > firmware downloader (K3 > Utility revision 1.1.3.6) before you do the upgrade." > > The latest utility version I see on the K3 Software Page is > rev 1.1.2.28 from 2/28. When I run that version it says > "newer version available," but offers no clue as to how or > where to find it. > > Any thoughts? > > > Thanks much! > > Regards, Joel > Joel R. Hallas, W1ZR > > _______________________________________________ > Elecraft mailing list > Post to: [email protected] > You must be a subscriber to post to the list. > Subscriber Info (Addr. Change, sub, unsub etc.): > http://mailman.qth.net/mailman/listinfo/elecraft > > Help: http://mailman.qth.net/subscribers.htm > Elecraft web page: http://www.elecraft.com _______________________________________________ Elecraft mailing list Post to: [email protected] You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
