Phil, This should work well. You'll want to install the latest firmware on all units (use the beta if it's more recent than production).
In particular, we recently updated the KXPA100 to be more tolerant of SWR swings when driving into an antenna tuner. 73, Wayne N6KR On Apr 9, 2014, at 4:23 PM, Phil Hystad <[email protected]> wrote: > I am planning on configuring my KX3 to use the KPA500 and the KAT500. Has > anyone done this and what did you need to do? I already know how to hook up > the KX3 to the KPA500 but would like to hear from someone using all three > together. In particular, connections between KPA500 and KAT500. > > Also, follow up question -- if you have a configuration where you switch KX3 > and K3 driving the KPA500+KAT500 do you disconnect any K3 involved AUX > cables? I presume you would run with the K3 powered off if you are driving > with a KX3. > > Thanks, > > 73, phil, K7PEH > > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to [email protected] ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
