Thanks for the review Ed. On that basis I have ordered a pair for my KX3 for use in the shack, as I wanted stereo and RF immunity particularly.
73 PS Ed I am working towards getting back on 144MHz EME again, with a smaller system than previously, but should be enough to work you on JT and possibly CW in ideal conditions. (2 x 2WL I0JXX XPOL yagis about 15dBd gain and 1kW from SSPA - special high power permit for EME). Lot of work to do to get there though. 73 David Anderson GM4JJJ > On 15 Jan 2014, at 06:01, Edward R Cole <[email protected]> wrote: > > I finally ordered and have received my West Mountain COMspkr for use with my > KX3. Work very nice and no RF sensitivity (even with 6-elem yagi pointed at > . I played with the HI CUT control and found a "2-oclock setting pleased me. > I have no equalization set on the KX3. With the control full CW sound is > very flat and crisp but hear more background noise (this evaluation listening > to 6m with preamps on and 20m with preamps off). > > Not using the COMspkr with my K3 as I have an old unamplified 8-inch National > Radio speaker that I like. > > 73, Ed - KL7UW > http://www.kl7uw.com > "Kits made by KL7UW" > Dubus Mag business: > [email protected] > > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
