Ah yeah. I forgot that! Thanks.
-----Original Message----- From: Don Wilhelm [mailto:[email protected]] Sent: Friday, March 08, 2013 5:32 PM To: Cady, Fred Cc: [email protected] Subject: Re: [Elecraft] RC2 - high side and low side different Fred, Your first post indicated that you could drive one from the high side and the other from the low side. If that is the case, then diodes are not required. If both must be driven from either the High side or the Low side, then yes, diodes would be required. 73, Don W3FPR On 3/8/2013 6:47 PM, Cady, Fred wrote: > Thanks Don, > I guess not normally but I need to drive two separate devices -- the > ant switch with the tribander and a 6 band bandpass filter. 10-15-20 > can be wired together to drive the ant switch but need to be separate > for the bandpass filter. > Cheers, > Fred > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
