Fred,
You can wire "OR" either the high side or the low side.
If you are running the tribander on the low side, just connect the 10,
15, and 20 outputs together, and drive the bandpass filter from the
separated low side outputs. Swap 'high' and 'low' if required.
73,
Don W3FPR
On 3/8/2013 12:56 PM, Cady, Fred wrote:
Thanks Jack. I figured that was the case. What I want(ed) to do is drive
the 6-pack x-bar switch which has a tribander on it so 10-15-20 will be
mapped to the same output PLUS drive a 6-band bandpass filter which
needs to have separate outputs for 10-15-20. Any ideas?
Cheers,
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
