Fred,
With the KRC2, no diodes are needed, just connect them together.
73,
Don W3FPR
On 3/8/2013 3:47 PM, Cady, Fred wrote:
Thanks Don. With diodes that will work great.
73
Fred
-----Original Message-----
From: Don Wilhelm [mailto:[email protected]]
Sent: Fri 3/8/2013 11:08 AM
To: Cady, Fred
Cc: [email protected]
Subject: Re: [Elecraft] RC2 - high side and low side different
Fred,
You can wire "OR" either the high side or the low side.
If you are running the tribander on the low side, just connect the 10,
15, and 20 outputs together, and drive the bandpass filter from the
separated low side outputs. Swap 'high' and 'low' if required.
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
