Hi Usman - Give the source build <http://gnuradio.org/redmine/projects/gnuradio/wiki/BuildGuide> a shot and see what components it configures during the `cmake` process. Try to install the dependencies <http://gnuradio.org/doc/doxygen/build_guide.html>from your OS's package manager if you don't have them, yet.
Cheers, Ben On Tue, Jan 24, 2017 at 1:02 AM, Usman Haider <usmanhaide...@gmail.com> wrote: > Hi, > > What is recommend to fix the issue? Should I go for source install instead > of PyBombs? > > > -- > Usman > > > On Fri, Jan 20, 2017 at 10:58 AM, Usman Haider <usmanhaide...@gmail.com> > wrote: > >> Hi Martin, >> >> I see from output of the command that a lot of components are disabled. >> >> -- ###################################################### >> -- # Gnuradio disabled components >> -- ###################################################### >> -- * python-support >> -- * doxygen >> -- * sphinx >> -- * gr-ctrlport >> -- * gnuradio-companion >> -- * gr-comedi >> -- * gr-utils >> -- * gr-video-sdl >> -- * gr-wxgui >> >> Looking further I found that PyBombs was unable to find SWIG as well. I >> remember that PyBombs install all the required dependencies itself? Do I >> have to reinstall everything from scratch? Following is the output of the >> command >> $ pybombs -vv rebuild gnuradio >> >> http://pasted.co/9ebaa709 >> >> Thanks. >> >> -- >> Usman >> >> On Thu, Jan 19, 2017 at 10:25 PM, Martin Braun <martin.br...@ettus.com> >> wrote: >> >>> It did not install GRC, and no other graphical tools either. Rerun >>> >>> $ pybombs -vv rebuild gnuradio >>> >>> to see where it fails during cmake. >>> >>> Cheers, >>> Martin >>> >>> On 01/18/2017 10:35 PM, Usman Haider wrote: >>> > Hi Martin, >>> > >>> > Yeah. Please find below the output >>> > >>> > $ ls ~/rfnoc/bin >>> > >>> > gnuradio-config-info >>> > uhd_cal_tx_iq_balance >>> > usrp2_card_burner >>> > octoclock_firmware_burner >>> > uhd_config_info >>> > usrp_n2xx_simple_net_burner >>> > rfnocmodtool >>> > uhd_find_devices >>> > usrp_x3xx_fpga_burner >>> > thrift >>> > uhd_image_loader >>> > volk-config-info >>> > uhd_cal_rx_iq_balance >>> > uhd_images_downloader >>> > volk_modtool >>> > uhd_cal_tx_dc_offset >>> > uhd_usrp_probe >>> > volk_profile >>> > >>> > $ pybombs inv >>> > >>> > PyBOMBS - INFO - PyBOMBS Version 2.3.1a >>> > Showing package state: >>> > uhd-fpga: installed >>> > uhd: installed >>> > apache-thrift: installed >>> > gnuradio: installed >>> > gr-ettus: installed >>> > >>> > >>> > You get anything from this? Thanks >>> > >>> > -- >>> > Usman >>> > >>> > On Thu, Jan 19, 2017 at 5:15 AM, Martin Braun <martin.br...@ettus.com >>> > <mailto:martin.br...@ettus.com>> wrote: >>> > >>> > It's almost as if UHD installed, but GNU Radio didn't, although >>> your >>> > output says otherwise. >>> > >>> > What does >>> > >>> > $ ls ~/rfnoc/bin >>> > >>> > look like? >>> > >>> > Or >>> > >>> > $ pybombs inv >>> > >>> > ? >>> > >>> > On 01/18/2017 02:10 AM, Usman Haider wrote: >>> > > Hi Nicolas, >>> > > >>> > > Thanks for your time. I did that but the result is same. I can >>> run >>> > > >>> > > |$|uhd_images_downloader >>> > > but >>> > > |$ gnuradio-companion >>> > > | >>> > > >>> > > fails. Let me know if any further information is needed. Thanks >>> > > >>> > > -- >>> > > Usman >>> > > On Wed, Jan 18, 2017 at 2:11 PM, Nicolas Cuervo >>> > > <nicolas.cue...@ettus.com <mailto:nicolas.cue...@ettus.com> >>> > <mailto:nicolas.cue...@ettus.com <mailto:nicolas.cue...@ettus.com >>> >>> >>> > wrote: >>> > > >>> > > Hello Usman, >>> > > >>> > > Did you set up your PyBOMBS environment? If not, please do >>> so. As >>> > > long as I understand your prefix is at ~/rfnoc. Being that >>> the case, >>> > > please run: >>> > > >>> > > $ source ~/rfnoc/setup_env.sh >>> > > >>> > > After this your shell will have access to everything which >>> has been >>> > > installed in that prefix, and you should be able to start >>> > > gnuradio-companion. Please have in mind that you have to set >>> up this >>> > > environment in every new shell you start. >>> > > >>> > > Please let us know if this doesn't work so that we can look >>> further >>> > > into it. >>> > > >>> > > Cheers, >>> > > >>> > > - Nicolas >>> > > >>> > > On Wed, Jan 18, 2017 at 9:58 AM, Usman Haider >>> > > <usmanhaide...@gmail.com <mailto:usmanhaide...@gmail.com> >>> > <mailto:usmanhaide...@gmail.com <mailto:usmanhaide...@gmail.com>>> >>> > wrote: >>> > > >>> > > Yes, could be the cause. After running the following >>> commands >>> > > >>> > > $ cd ~/rfnoc >>> > > $ source ./setup_env.sh >>> > > $ uhd_images_downloader >>> > > >>> > > I was able to download the images. But when I tried to >>> run >>> > > >>> > > |$ gnuradio-companion| >>> > > >>> > > It failed giving "The program 'gnuradio-companion' is >>> > currently >>> > > not installed. You can install it by typing: sudo apt-get >>> > > install gnuradio". Although, I have >>> > > >>> > > $ gnuradio-config-info --v >>> > > v3.7.10.1-202-g6225e5d4 >>> > > >>> > > $ gnuradio-config-info --prefix >>> > > /home/emb/rfnoc >>> > > >>> > > Otuput of PyBOMBS is as under. >>> > > >>> > > $ pybombs prefix init ~/rfnoc -R rfnoc -a rfnoc >>> > > PyBOMBS - INFO - PyBOMBS Version 2.3.1a >>> > > PyBOMBS.prefix - INFO - Creating directory >>> `/home/emb/rfnoc' >>> > > Alias `rfnoc' already exists, overwrite Y/[N]? y >>> > > PyBOMBS.ConfigManager - INFO - Creating new config file >>> > > /home/emb/rfnoc/.pybombs/config.yml >>> > > PyBOMBS.prefix - INFO - Installing default packages for >>> > prefix... >>> > > PyBOMBS.prefix - INFO - >>> > > - gnuradio >>> > > - uhd >>> > > - gr-ettus >>> > > - uhd-fpga >>> > > PyBOMBS.install_manager - INFO - Phase 1: Creating >>> install >>> > tree >>> > > and installing binary packages: >>> > > DEPRECATION: The default format will switch to columns >>> in the >>> > > future. You can use --format=(legacy|columns) (or define >>> a >>> > > format=(legacy|columns) in your pip.conf under the [list] >>> > > section) to disable this warning. >>> > > Install tree: >>> > > | >>> > > +- uhd-fpga >>> > > | >>> > > \- gr-ettus >>> > > | >>> > > +- uhd >>> > > | >>> > > \- gnuradio >>> > > | >>> > > +- uhd >>> > > | >>> > > \- apache-thrift >>> > > PyBOMBS.install_manager - INFO - Phase 2: Recursively >>> > installing >>> > > source packages to prefix: >>> > > PyBOMBS.install_manager - INFO - Installing package: >>> > apache-thrift >>> > > Cloning: (100%) >>> > > [============================ >>> =============================]] >>> > > Cloning: (100%) >>> > > [============================ >>> =============================] >>> > > Configuring: (100%) >>> > > [============================ >>> =============================] >>> > > Building: (100%) >>> > > [============================ >>> =============================] >>> > > Installing: (100%) >>> > > [============================ >>> =============================] >>> > > PyBOMBS.install_manager - INFO - Installation successful. >>> > > PyBOMBS.install_manager - INFO - Installing package: uhd >>> > > Cloning: (100%) >>> > > [============================ >>> =============================]] >>> > > Configuring: (100%) >>> > > [============================ >>> =============================] >>> > > Building: (100%) >>> > > [============================ >>> =============================] >>> > > Installing: (100%) >>> > > [============================ >>> =============================] >>> > > PyBOMBS.install_manager - INFO - Installation successful. >>> > > PyBOMBS.install_manager - INFO - Installing package: >>> gnuradio >>> > > Cloning: (100%) >>> > > [============================ >>> =============================]] >>> > > Configuring: (100%) >>> > > [============================ >>> =============================] >>> > > Building: (100%) >>> > > [============================ >>> =============================] >>> > > Installing: (100%) >>> > > [============================ >>> =============================] >>> > > PyBOMBS.install_manager - INFO - Installation successful. >>> > > PyBOMBS.install_manager - INFO - Installing package: >>> gr-ettus >>> > > Cloning: (100%) >>> > > [============================ >>> =============================] >>> > > Configuring: (100%) >>> > > [============================ >>> =============================] >>> > > Building: (100%) >>> > > [============================ >>> =============================] >>> > > Installing: (100%) >>> > > [============================ >>> =============================] >>> > > PyBOMBS.install_manager - INFO - Installation successful. >>> > > PyBOMBS.install_manager - INFO - Installing package: >>> uhd-fpga >>> > > Cloning: (100%) >>> > > [============================ >>> =============================]] >>> > > Configuring: (100%) >>> > > [============================ >>> =============================] >>> > > Building: (100%) >>> > > [============================ >>> =============================] >>> > > Installing: (100%) >>> > > [============================ >>> =============================] >>> > > PyBOMBS.install_manager - INFO - Installation successful. >>> > > >>> > > >>> > > Any pointers? :) >>> > > >>> > > -- >>> > > Usman >>> > > >>> > > >>> > > On Tue, Jan 17, 2017 at 4:47 PM, Marcus Müller >>> > > <marcus.muel...@ettus.com <mailto:marcus.mueller@ettus.c >>> om> >>> > <mailto:marcus.muel...@ettus.com <mailto:marcus.muel...@ettus.com >>> >>> >>> > wrote: >>> > > >>> > > Possibly just a temporary failure then; github or >>> your >>> > > network might have had problems :) >>> > > >>> > > Cheers, >>> > > >>> > > Marcus >>> > > >>> > > >>> > > On 17.01.2017 08:01, Usman Haider wrote: >>> > >> Hello Marcus, >>> > >> >>> > >> I am surprised the following command ran >>> successfully. >>> > >> >>> > >> $ pybombs -vv recipes add gr-recipes >>> > >> git+https://github.com/gnuradio/gr-recipes.git >>> > <https://github.com/gnuradio/gr-recipes.git> >>> > >> <https://github.com/gnuradio/gr-recipes.git >>> > <https://github.com/gnuradio/gr-recipes.git>> >>> > >> >>> > >> -- >>> > >> Usman >>> > >> >>> > >> On Mon, Jan 16, 2017 at 5:10 PM, Marcus Müller >>> > >> <marcus.muel...@ettus.com <mailto: >>> marcus.muel...@ettus.com> >>> > >> <mailto:marcus.muel...@ettus.com <mailto: >>> marcus.muel...@ettus.com>>> wrote: >>> > >> >>> > >> Hm, interesting. Could you run your pybombs >>> command >>> > >> with "-vv"? >>> > >> >>> > >> Best regards, >>> > >> >>> > >> Marcus >>> > >> >>> > >> On 01/16/2017 12:55 PM, Usman Haider wrote: >>> > >>> Hello Nicolas, >>> > >>> >>> > >>> Thanks for your reply. I have sufficient disk >>> space, >>> > >>> more than 400 GB, so that is not an issue. I >>> do not >>> > >>> have any .gitconfig file in my home directory. >>> I can >>> > >>> download the recipes manually using the >>> command you >>> > >>> mentioned. >>> > >>> >>> > >>> git clone https://github.com/gnuradio/gr >>> -recipes.git >>> > <https://github.com/gnuradio/gr-recipes.git> >>> > >>> <https://github.com/gnuradio/gr-recipes.git >>> > <https://github.com/gnuradio/gr-recipes.git>> gr-recipes >>> > >>> >>> > >>> >>> > >>> Please let me know if you need any further >>> > >>> information. Thanks. >>> > >>> >>> > >>> -- >>> > >>> Usman >>> > >>> >>> > >>> On Mon, Jan 16, 2017 at 3:21 PM, Nicolas Cuervo >>> > >>> <nicolas.cue...@ettus.com <mailto: >>> nicolas.cue...@ettus.com> >>> > >>> <mailto:nicolas.cue...@ettus.com >>> > <mailto:nicolas.cue...@ettus.com>>> wrote: >>> > >>> >>> > >>> Hello Usman, >>> > >>> >>> > >>> uhm, this is odd. So far I can see the >>> > command is >>> > >>> correct. Although error 128 means that git >>> did >>> > >>> not exit cleanly, and I just run it and it >>> ran >>> > >>> fine. Just some guesses for now: >>> > >>> >>> > >>> 1. Do you have enough disk space? the >>> recipes do >>> > >>> not require a lot of disk space, though, >>> but not >>> > >>> enough space would lead to this. >>> > >>> 2. Do you have specific cloning >>> configuration in >>> > >>> your gitconfig? you can check this by >>> typing: >>> > >>> git config --global --edit >>> > >>> >>> > >>> or just by editing .gitconfig which is >>> normally >>> > >>> located at your home directory. >>> > >>> 3. Can you clone anything else manually? >>> you can >>> > >>> try running: >>> > >>> >>> > >>> git clone >>> > >>> https://github.com/gnuradio/gr-recipes.git >>> > <https://github.com/gnuradio/gr-recipes.git> >>> > >>> <https://github.com/gnuradio/ >>> gr-recipes.git >>> > <https://github.com/gnuradio/gr-recipes.git>> >>> > >>> gr-recipes >>> > >>> >>> > >>> just as a test that your git is working >>> as >>> > >>> expected. >>> > >>> >>> > >>> Please let us know if you find out >>> something >>> > with >>> > >>> this hypothesis I mentioned. >>> > >>> >>> > >>> Cheers, >>> > >>> >>> > >>> - Nicolas >>> > >>> >>> > >>> >>> > >>> >>> > >>> >>> > >>> On Mon, Jan 16, 2017 at 9:46 AM, Usman >>> Haider >>> > >>> <usmanhaide...@gmail.com >>> > <mailto:usmanhaide...@gmail.com> >>> > >>> <mailto:usmanhaide...@gmail.com >>> > <mailto:usmanhaide...@gmail.com>>> wrote: >>> > >>> >>> > >>> I am following this guide to get >>> started >>> > with >>> > >>> RFNoC. I am using Ubuntu 14.04 and I >>> ran >>> > >>> following commands >>> > >>> >>> > >>> $ sudo apt-get install git >>> > >>> $ sudo apt-get install >>> python-setuptools >>> > python-dev build-essential >>> > >>> $ sudo easy_install pip >>> > >>> $ sudo pip install >>> > git+https://github.com/gnuradio/pybombs.git >>> > <https://github.com/gnuradio/pybombs.git> >>> > >>> <https://github.com/gnuradio/ >>> pybombs.git >>> > <https://github.com/gnuradio/pybombs.git>> >>> > >>> >>> > >>> When I run following command >>> > >>> >>> > >>> $ pybombs -v recipes add gr-recipes >>> > git+https://github.com/gnuradio/gr-recipes.git >>> > <https://github.com/gnuradio/gr-recipes.git> >>> > >>> >>> > <https://github.com/gnuradio/gr-recipes.git >>> > <https://github.com/gnuradio/gr-recipes.git>> >>> > >>> >>> > >>> I get output. >>> > >>> ..... ..... ..... OMBS.PackageManager - >>> > DEBUG >>> > >>> - Checking if package git is >>> installed... >>> > >>> PyBOMBS.Packager.apt - DEBUG - Package >>> git >>> > >>> has version 1.9.1 installed >>> > >>> PyBOMBS.install_manager - DEBUG - >>> Phase 2: >>> > >>> Recursively installing source packages >>> to >>> > >>> prefix: PyBOMBS.Fetcher.git - DEBUG - >>> > >>> Requirements met. PyBOMBS.Fetcher.git - >>> > DEBUG >>> > >>> - Using url - >>> > >>> >>> > https://github.com/gnuradio/gr-recipes.git >>> > <https://github.com/gnuradio/gr-recipes.git> >>> > >>> >>> > <https://github.com/gnuradio/gr-recipes.git >>> > <https://github.com/gnuradio/gr-recipes.git>> >>> > >>> PyBOMBS._process_thread() - DEBUG - >>> > Executing >>> > >>> command `git clone >>> > >>> >>> > https://github.com/gnuradio/gr-recipes.git >>> > <https://github.com/gnuradio/gr-recipes.git> >>> > >>> >>> > <https://github.com/gnuradio/gr-recipes.git >>> > <https://github.com/gnuradio/gr-recipes.git>> >>> > >>> gr-recipes' Cloning: [ >>> > >>> PyBOMBS.recipes - ERROR - Could not >>> fetch >>> > >>> recipesCloning: [ PyBOMBS.recipes - >>> > ERROR >>> > >>> - Could not fetch recipes: Process >>> > >>> returnCloning: (100%) >>> > >>> >>> > [=========================================================] >>> > >>> PyBOMBS.monitor_process() - DEBUG - >>> Thread >>> > >>> signaled termination or returned >>> > >>> PyBOMBS.monitor_process() - DEBUG - >>> Return >>> > >>> value: 128 PyBOMBS.recipes - ERROR - >>> Could >>> > >>> not fetch recipes: Process returned >>> > value: 128 >>> > >>> What could be the issue? pybombs >>> version is >>> > >>> 2.3.1a. Thanks -- >>> > >>> Usman >>> > >>> >>> > _______________________________________________ >>> > >>> Discuss-gnuradio mailing list >>> > >>> Discuss-gnuradio@gnu.org >>> > <mailto:Discuss-gnuradio@gnu.org> >>> > >>> <mailto:Discuss-gnuradio@gnu.org >>> > <mailto:Discuss-gnuradio@gnu.org>> >>> > >>> >>> > https://lists.gnu.org/mailman/listinfo/discuss-gnuradio >>> > <https://lists.gnu.org/mailman/listinfo/discuss-gnuradio> >>> > >>> <https://lists.gnu.org/mailma >>> n/listinfo/discuss-gnuradio >>> > <https://lists.gnu.org/mailman/listinfo/discuss-gnuradio>> >>> > >>> >>> > >>> >>> > >>> _____________________________ >>> __________________ >>> > >>> Discuss-gnuradio mailing list >>> > >>> Discuss-gnuradio@gnu.org <mailto: >>> Discuss-gnuradio@gnu.org> >>> > >>> <mailto:Discuss-gnuradio@gnu.org >>> > <mailto:Discuss-gnuradio@gnu.org>> >>> > >>> >>> > https://lists.gnu.org/mailman/listinfo/discuss-gnuradio >>> > <https://lists.gnu.org/mailman/listinfo/discuss-gnuradio> >>> > >>> <https://lists.gnu.org/mailma >>> n/listinfo/discuss-gnuradio >>> > <https://lists.gnu.org/mailman/listinfo/discuss-gnuradio>> >>> > >> _______________________________________________ >>> > >> Discuss-gnuradio mailing list >>> Discuss-gnuradio@gnu.org <mailto:Discuss-gnuradio@gnu.org> >>> > >> <mailto:Discuss-gnuradio@gnu.org >>> > <mailto:Discuss-gnuradio@gnu.org>> >>> > >> >>> > https://lists.gnu.org/mailman/listinfo/discuss-gnuradio >>> > <https://lists.gnu.org/mailman/listinfo/discuss-gnuradio> >>> > <https://lists.gnu.org/mailman/listinfo/discuss-gnuradio >>> > <https://lists.gnu.org/mailman/listinfo/discuss-gnuradio>> >>> > >> >>> > >> >>> > > >>> > > >>> > > _______________________________________________ >>> > > Discuss-gnuradio mailing list >>> > > Discuss-gnuradio@gnu.org <mailto:Discuss-gnuradio@gnu.o >>> rg> >>> > <mailto:Discuss-gnuradio@gnu.org <mailto:Discuss-gnuradio@gnu.org >>> >> >>> > > https://lists.gnu.org/mailman/listinfo/discuss-gnuradio >>> > <https://lists.gnu.org/mailman/listinfo/discuss-gnuradio> >>> > > <https://lists.gnu.org/mailman/listinfo/discuss-gnuradio >>> > <https://lists.gnu.org/mailman/listinfo/discuss-gnuradio>> >>> > > >>> > > >>> > > >>> > > >>> > > >>> > > _______________________________________________ >>> > > Discuss-gnuradio mailing list >>> > > Discuss-gnuradio@gnu.org <mailto:Discuss-gnuradio@gnu.org> >>> > > https://lists.gnu.org/mailman/listinfo/discuss-gnuradio >>> > <https://lists.gnu.org/mailman/listinfo/discuss-gnuradio> >>> > > >>> > >>> > >>> > _______________________________________________ >>> > Discuss-gnuradio mailing list >>> > Discuss-gnuradio@gnu.org <mailto:Discuss-gnuradio@gnu.org> >>> > https://lists.gnu.org/mailman/listinfo/discuss-gnuradio >>> > <https://lists.gnu.org/mailman/listinfo/discuss-gnuradio> >>> > >>> > >>> >>> >>> _______________________________________________ >>> Discuss-gnuradio mailing list >>> Discuss-gnuradio@gnu.org >>> https://lists.gnu.org/mailman/listinfo/discuss-gnuradio >>> >> >> > > _______________________________________________ > Discuss-gnuradio mailing list > Discuss-gnuradio@gnu.org > https://lists.gnu.org/mailman/listinfo/discuss-gnuradio > >
_______________________________________________ Discuss-gnuradio mailing list Discuss-gnuradio@gnu.org https://lists.gnu.org/mailman/listinfo/discuss-gnuradio
