Hi Martin, I see from output of the command that a lot of components are disabled.
-- ###################################################### -- # Gnuradio disabled components -- ###################################################### -- * python-support -- * doxygen -- * sphinx -- * gr-ctrlport -- * gnuradio-companion -- * gr-comedi -- * gr-utils -- * gr-video-sdl -- * gr-wxgui Looking further I found that PyBombs was unable to find SWIG as well. I remember that PyBombs install all the required dependencies itself? Do I have to reinstall everything from scratch? Following is the output of the command $ pybombs -vv rebuild gnuradio http://pasted.co/9ebaa709 Thanks. -- Usman On Thu, Jan 19, 2017 at 10:25 PM, Martin Braun <martin.br...@ettus.com> wrote: > It did not install GRC, and no other graphical tools either. Rerun > > $ pybombs -vv rebuild gnuradio > > to see where it fails during cmake. > > Cheers, > Martin > > On 01/18/2017 10:35 PM, Usman Haider wrote: > > Hi Martin, > > > > Yeah. Please find below the output > > > > $ ls ~/rfnoc/bin > > > > gnuradio-config-info > > uhd_cal_tx_iq_balance > > usrp2_card_burner > > octoclock_firmware_burner > > uhd_config_info > > usrp_n2xx_simple_net_burner > > rfnocmodtool > > uhd_find_devices > > usrp_x3xx_fpga_burner > > thrift > > uhd_image_loader > > volk-config-info > > uhd_cal_rx_iq_balance > > uhd_images_downloader > > volk_modtool > > uhd_cal_tx_dc_offset > > uhd_usrp_probe > > volk_profile > > > > $ pybombs inv > > > > PyBOMBS - INFO - PyBOMBS Version 2.3.1a > > Showing package state: > > uhd-fpga: installed > > uhd: installed > > apache-thrift: installed > > gnuradio: installed > > gr-ettus: installed > > > > > > You get anything from this? Thanks > > > > -- > > Usman > > > > On Thu, Jan 19, 2017 at 5:15 AM, Martin Braun <martin.br...@ettus.com > > <mailto:martin.br...@ettus.com>> wrote: > > > > It's almost as if UHD installed, but GNU Radio didn't, although your > > output says otherwise. > > > > What does > > > > $ ls ~/rfnoc/bin > > > > look like? > > > > Or > > > > $ pybombs inv > > > > ? > > > > On 01/18/2017 02:10 AM, Usman Haider wrote: > > > Hi Nicolas, > > > > > > Thanks for your time. I did that but the result is same. I can run > > > > > > |$|uhd_images_downloader > > > but > > > |$ gnuradio-companion > > > | > > > > > > fails. Let me know if any further information is needed. Thanks > > > > > > -- > > > Usman > > > On Wed, Jan 18, 2017 at 2:11 PM, Nicolas Cuervo > > > <nicolas.cue...@ettus.com <mailto:nicolas.cue...@ettus.com> > > <mailto:nicolas.cue...@ettus.com <mailto:nicolas.cue...@ettus.com>>> > > wrote: > > > > > > Hello Usman, > > > > > > Did you set up your PyBOMBS environment? If not, please do > so. As > > > long as I understand your prefix is at ~/rfnoc. Being that the > case, > > > please run: > > > > > > $ source ~/rfnoc/setup_env.sh > > > > > > After this your shell will have access to everything which has > been > > > installed in that prefix, and you should be able to start > > > gnuradio-companion. Please have in mind that you have to set > up this > > > environment in every new shell you start. > > > > > > Please let us know if this doesn't work so that we can look > further > > > into it. > > > > > > Cheers, > > > > > > - Nicolas > > > > > > On Wed, Jan 18, 2017 at 9:58 AM, Usman Haider > > > <usmanhaide...@gmail.com <mailto:usmanhaide...@gmail.com> > > <mailto:usmanhaide...@gmail.com <mailto:usmanhaide...@gmail.com>>> > > wrote: > > > > > > Yes, could be the cause. After running the following > commands > > > > > > $ cd ~/rfnoc > > > $ source ./setup_env.sh > > > $ uhd_images_downloader > > > > > > I was able to download the images. But when I tried to run > > > > > > |$ gnuradio-companion| > > > > > > It failed giving "The program 'gnuradio-companion' is > > currently > > > not installed. You can install it by typing: sudo apt-get > > > install gnuradio". Although, I have > > > > > > $ gnuradio-config-info --v > > > v3.7.10.1-202-g6225e5d4 > > > > > > $ gnuradio-config-info --prefix > > > /home/emb/rfnoc > > > > > > Otuput of PyBOMBS is as under. > > > > > > $ pybombs prefix init ~/rfnoc -R rfnoc -a rfnoc > > > PyBOMBS - INFO - PyBOMBS Version 2.3.1a > > > PyBOMBS.prefix - INFO - Creating directory > `/home/emb/rfnoc' > > > Alias `rfnoc' already exists, overwrite Y/[N]? y > > > PyBOMBS.ConfigManager - INFO - Creating new config file > > > /home/emb/rfnoc/.pybombs/config.yml > > > PyBOMBS.prefix - INFO - Installing default packages for > > prefix... > > > PyBOMBS.prefix - INFO - > > > - gnuradio > > > - uhd > > > - gr-ettus > > > - uhd-fpga > > > PyBOMBS.install_manager - INFO - Phase 1: Creating install > > tree > > > and installing binary packages: > > > DEPRECATION: The default format will switch to columns in > the > > > future. You can use --format=(legacy|columns) (or define a > > > format=(legacy|columns) in your pip.conf under the [list] > > > section) to disable this warning. > > > Install tree: > > > | > > > +- uhd-fpga > > > | > > > \- gr-ettus > > > | > > > +- uhd > > > | > > > \- gnuradio > > > | > > > +- uhd > > > | > > > \- apache-thrift > > > PyBOMBS.install_manager - INFO - Phase 2: Recursively > > installing > > > source packages to prefix: > > > PyBOMBS.install_manager - INFO - Installing package: > > apache-thrift > > > Cloning: (100%) > > > [============================= > ============================]] > > > Cloning: (100%) > > > [============================= > ============================] > > > Configuring: (100%) > > > [============================= > ============================] > > > Building: (100%) > > > [============================= > ============================] > > > Installing: (100%) > > > [============================= > ============================] > > > PyBOMBS.install_manager - INFO - Installation successful. > > > PyBOMBS.install_manager - INFO - Installing package: uhd > > > Cloning: (100%) > > > [============================= > ============================]] > > > Configuring: (100%) > > > [============================= > ============================] > > > Building: (100%) > > > [============================= > ============================] > > > Installing: (100%) > > > [============================= > ============================] > > > PyBOMBS.install_manager - INFO - Installation successful. > > > PyBOMBS.install_manager - INFO - Installing package: > gnuradio > > > Cloning: (100%) > > > [============================= > ============================]] > > > Configuring: (100%) > > > [============================= > ============================] > > > Building: (100%) > > > [============================= > ============================] > > > Installing: (100%) > > > [============================= > ============================] > > > PyBOMBS.install_manager - INFO - Installation successful. > > > PyBOMBS.install_manager - INFO - Installing package: > gr-ettus > > > Cloning: (100%) > > > [============================= > ============================] > > > Configuring: (100%) > > > [============================= > ============================] > > > Building: (100%) > > > [============================= > ============================] > > > Installing: (100%) > > > [============================= > ============================] > > > PyBOMBS.install_manager - INFO - Installation successful. > > > PyBOMBS.install_manager - INFO - Installing package: > uhd-fpga > > > Cloning: (100%) > > > [============================= > ============================]] > > > Configuring: (100%) > > > [============================= > ============================] > > > Building: (100%) > > > [============================= > ============================] > > > Installing: (100%) > > > [============================= > ============================] > > > PyBOMBS.install_manager - INFO - Installation successful. > > > > > > > > > Any pointers? :) > > > > > > -- > > > Usman > > > > > > > > > On Tue, Jan 17, 2017 at 4:47 PM, Marcus Müller > > > <marcus.muel...@ettus.com <mailto:marcus.muel...@ettus.com > > > > <mailto:marcus.muel...@ettus.com <mailto:marcus.muel...@ettus.com>>> > > wrote: > > > > > > Possibly just a temporary failure then; github or your > > > network might have had problems :) > > > > > > Cheers, > > > > > > Marcus > > > > > > > > > On 17.01.2017 08:01, Usman Haider wrote: > > >> Hello Marcus, > > >> > > >> I am surprised the following command ran successfully. > > >> > > >> $ pybombs -vv recipes add gr-recipes > > >> git+https://github.com/gnuradio/gr-recipes.git > > <https://github.com/gnuradio/gr-recipes.git> > > >> <https://github.com/gnuradio/gr-recipes.git > > <https://github.com/gnuradio/gr-recipes.git>> > > >> > > >> -- > > >> Usman > > >> > > >> On Mon, Jan 16, 2017 at 5:10 PM, Marcus Müller > > >> <marcus.muel...@ettus.com <mailto: > marcus.muel...@ettus.com> > > >> <mailto:marcus.muel...@ettus.com <mailto: > marcus.muel...@ettus.com>>> wrote: > > >> > > >> Hm, interesting. Could you run your pybombs > command > > >> with "-vv"? > > >> > > >> Best regards, > > >> > > >> Marcus > > >> > > >> On 01/16/2017 12:55 PM, Usman Haider wrote: > > >>> Hello Nicolas, > > >>> > > >>> Thanks for your reply. I have sufficient disk > space, > > >>> more than 400 GB, so that is not an issue. I > do not > > >>> have any .gitconfig file in my home directory. I > can > > >>> download the recipes manually using the command > you > > >>> mentioned. > > >>> > > >>> git clone https://github.com/gnuradio/ > gr-recipes.git > > <https://github.com/gnuradio/gr-recipes.git> > > >>> <https://github.com/gnuradio/gr-recipes.git > > <https://github.com/gnuradio/gr-recipes.git>> gr-recipes > > >>> > > >>> > > >>> Please let me know if you need any further > > >>> information. Thanks. > > >>> > > >>> -- > > >>> Usman > > >>> > > >>> On Mon, Jan 16, 2017 at 3:21 PM, Nicolas Cuervo > > >>> <nicolas.cue...@ettus.com <mailto: > nicolas.cue...@ettus.com> > > >>> <mailto:nicolas.cue...@ettus.com > > <mailto:nicolas.cue...@ettus.com>>> wrote: > > >>> > > >>> Hello Usman, > > >>> > > >>> uhm, this is odd. So far I can see the > > command is > > >>> correct. Although error 128 means that git > did > > >>> not exit cleanly, and I just run it and it > ran > > >>> fine. Just some guesses for now: > > >>> > > >>> 1. Do you have enough disk space? the > recipes do > > >>> not require a lot of disk space, though, but > not > > >>> enough space would lead to this. > > >>> 2. Do you have specific cloning > configuration in > > >>> your gitconfig? you can check this by typing: > > >>> git config --global --edit > > >>> > > >>> or just by editing .gitconfig which is > normally > > >>> located at your home directory. > > >>> 3. Can you clone anything else manually? you > can > > >>> try running: > > >>> > > >>> git clone > > >>> https://github.com/gnuradio/gr-recipes.git > > <https://github.com/gnuradio/gr-recipes.git> > > >>> <https://github.com/gnuradio/gr-recipes.git > > <https://github.com/gnuradio/gr-recipes.git>> > > >>> gr-recipes > > >>> > > >>> just as a test that your git is working as > > >>> expected. > > >>> > > >>> Please let us know if you find out something > > with > > >>> this hypothesis I mentioned. > > >>> > > >>> Cheers, > > >>> > > >>> - Nicolas > > >>> > > >>> > > >>> > > >>> > > >>> On Mon, Jan 16, 2017 at 9:46 AM, Usman Haider > > >>> <usmanhaide...@gmail.com > > <mailto:usmanhaide...@gmail.com> > > >>> <mailto:usmanhaide...@gmail.com > > <mailto:usmanhaide...@gmail.com>>> wrote: > > >>> > > >>> I am following this guide to get started > > with > > >>> RFNoC. I am using Ubuntu 14.04 and I ran > > >>> following commands > > >>> > > >>> $ sudo apt-get install git > > >>> $ sudo apt-get install python-setuptools > > python-dev build-essential > > >>> $ sudo easy_install pip > > >>> $ sudo pip install > > git+https://github.com/gnuradio/pybombs.git > > <https://github.com/gnuradio/pybombs.git> > > >>> <https://github.com/gnuradio/pybombs.git > > <https://github.com/gnuradio/pybombs.git>> > > >>> > > >>> When I run following command > > >>> > > >>> $ pybombs -v recipes add gr-recipes > > git+https://github.com/gnuradio/gr-recipes.git > > <https://github.com/gnuradio/gr-recipes.git> > > >>> > > <https://github.com/gnuradio/gr-recipes.git > > <https://github.com/gnuradio/gr-recipes.git>> > > >>> > > >>> I get output. > > >>> ..... ..... ..... OMBS.PackageManager - > > DEBUG > > >>> - Checking if package git is installed... > > >>> PyBOMBS.Packager.apt - DEBUG - Package > git > > >>> has version 1.9.1 installed > > >>> PyBOMBS.install_manager - DEBUG - Phase > 2: > > >>> Recursively installing source packages to > > >>> prefix: PyBOMBS.Fetcher.git - DEBUG - > > >>> Requirements met. PyBOMBS.Fetcher.git - > > DEBUG > > >>> - Using url - > > >>> > > https://github.com/gnuradio/gr-recipes.git > > <https://github.com/gnuradio/gr-recipes.git> > > >>> > > <https://github.com/gnuradio/gr-recipes.git > > <https://github.com/gnuradio/gr-recipes.git>> > > >>> PyBOMBS._process_thread() - DEBUG - > > Executing > > >>> command `git clone > > >>> > > https://github.com/gnuradio/gr-recipes.git > > <https://github.com/gnuradio/gr-recipes.git> > > >>> > > <https://github.com/gnuradio/gr-recipes.git > > <https://github.com/gnuradio/gr-recipes.git>> > > >>> gr-recipes' Cloning: [ > > >>> PyBOMBS.recipes - ERROR - Could not fetch > > >>> recipesCloning: [ PyBOMBS.recipes - > > ERROR > > >>> - Could not fetch recipes: Process > > >>> returnCloning: (100%) > > >>> > > [=========================================================] > > >>> PyBOMBS.monitor_process() - DEBUG - > Thread > > >>> signaled termination or returned > > >>> PyBOMBS.monitor_process() - DEBUG - > Return > > >>> value: 128 PyBOMBS.recipes - ERROR - > Could > > >>> not fetch recipes: Process returned > > value: 128 > > >>> What could be the issue? pybombs version > is > > >>> 2.3.1a. Thanks -- > > >>> Usman > > >>> > > _______________________________________________ > > >>> Discuss-gnuradio mailing list > > >>> Discuss-gnuradio@gnu.org > > <mailto:Discuss-gnuradio@gnu.org> > > >>> <mailto:Discuss-gnuradio@gnu.org > > <mailto:Discuss-gnuradio@gnu.org>> > > >>> > > https://lists.gnu.org/mailman/listinfo/discuss-gnuradio > > <https://lists.gnu.org/mailman/listinfo/discuss-gnuradio> > > >>> <https://lists.gnu.org/ > mailman/listinfo/discuss-gnuradio > > <https://lists.gnu.org/mailman/listinfo/discuss-gnuradio>> > > >>> > > >>> > > >>> _______________________________________________ > > >>> Discuss-gnuradio mailing list > > >>> Discuss-gnuradio@gnu.org <mailto: > Discuss-gnuradio@gnu.org> > > >>> <mailto:Discuss-gnuradio@gnu.org > > <mailto:Discuss-gnuradio@gnu.org>> > > >>> > > https://lists.gnu.org/mailman/listinfo/discuss-gnuradio > > <https://lists.gnu.org/mailman/listinfo/discuss-gnuradio> > > >>> <https://lists.gnu.org/mailman/listinfo/discuss- > gnuradio > > <https://lists.gnu.org/mailman/listinfo/discuss-gnuradio>> > > >> _______________________________________________ > > >> Discuss-gnuradio mailing list > Discuss-gnuradio@gnu.org <mailto:Discuss-gnuradio@gnu.org> > > >> <mailto:Discuss-gnuradio@gnu.org > > <mailto:Discuss-gnuradio@gnu.org>> > > >> > > https://lists.gnu.org/mailman/listinfo/discuss-gnuradio > > <https://lists.gnu.org/mailman/listinfo/discuss-gnuradio> > > <https://lists.gnu.org/mailman/listinfo/discuss-gnuradio > > <https://lists.gnu.org/mailman/listinfo/discuss-gnuradio>> > > >> > > >> > > > > > > > > > _______________________________________________ > > > Discuss-gnuradio mailing list > > > Discuss-gnuradio@gnu.org <mailto:Discuss-gnuradio@gnu.org> > > <mailto:Discuss-gnuradio@gnu.org <mailto:Discuss-gnuradio@gnu.org>> > > > https://lists.gnu.org/mailman/listinfo/discuss-gnuradio > > <https://lists.gnu.org/mailman/listinfo/discuss-gnuradio> > > > <https://lists.gnu.org/mailman/listinfo/discuss-gnuradio > > <https://lists.gnu.org/mailman/listinfo/discuss-gnuradio>> > > > > > > > > > > > > > > > > > > _______________________________________________ > > > Discuss-gnuradio mailing list > > > Discuss-gnuradio@gnu.org <mailto:Discuss-gnuradio@gnu.org> > > > https://lists.gnu.org/mailman/listinfo/discuss-gnuradio > > <https://lists.gnu.org/mailman/listinfo/discuss-gnuradio> > > > > > > > > > _______________________________________________ > > Discuss-gnuradio mailing list > > Discuss-gnuradio@gnu.org <mailto:Discuss-gnuradio@gnu.org> > > https://lists.gnu.org/mailman/listinfo/discuss-gnuradio > > <https://lists.gnu.org/mailman/listinfo/discuss-gnuradio> > > > > > > > _______________________________________________ > Discuss-gnuradio mailing list > Discuss-gnuradio@gnu.org > https://lists.gnu.org/mailman/listinfo/discuss-gnuradio >
_______________________________________________ Discuss-gnuradio mailing list Discuss-gnuradio@gnu.org https://lists.gnu.org/mailman/listinfo/discuss-gnuradio
