It did not install GRC, and no other graphical tools either. Rerun $ pybombs -vv rebuild gnuradio
to see where it fails during cmake. Cheers, Martin On 01/18/2017 10:35 PM, Usman Haider wrote: > Hi Martin, > > Yeah. Please find below the output > > $ ls ~/rfnoc/bin > > gnuradio-config-info > uhd_cal_tx_iq_balance > usrp2_card_burner > octoclock_firmware_burner > uhd_config_info > usrp_n2xx_simple_net_burner > rfnocmodtool > uhd_find_devices > usrp_x3xx_fpga_burner > thrift > uhd_image_loader > volk-config-info > uhd_cal_rx_iq_balance > uhd_images_downloader > volk_modtool > uhd_cal_tx_dc_offset > uhd_usrp_probe > volk_profile > > $ pybombs inv > > PyBOMBS - INFO - PyBOMBS Version 2.3.1a > Showing package state: > uhd-fpga: installed > uhd: installed > apache-thrift: installed > gnuradio: installed > gr-ettus: installed > > > You get anything from this? Thanks > > -- > Usman > > On Thu, Jan 19, 2017 at 5:15 AM, Martin Braun <martin.br...@ettus.com > <mailto:martin.br...@ettus.com>> wrote: > > It's almost as if UHD installed, but GNU Radio didn't, although your > output says otherwise. > > What does > > $ ls ~/rfnoc/bin > > look like? > > Or > > $ pybombs inv > > ? > > On 01/18/2017 02:10 AM, Usman Haider wrote: > > Hi Nicolas, > > > > Thanks for your time. I did that but the result is same. I can run > > > > |$|uhd_images_downloader > > but > > |$ gnuradio-companion > > | > > > > fails. Let me know if any further information is needed. Thanks > > > > -- > > Usman > > On Wed, Jan 18, 2017 at 2:11 PM, Nicolas Cuervo > > <nicolas.cue...@ettus.com <mailto:nicolas.cue...@ettus.com> > <mailto:nicolas.cue...@ettus.com <mailto:nicolas.cue...@ettus.com>>> > wrote: > > > > Hello Usman, > > > > Did you set up your PyBOMBS environment? If not, please do so. As > > long as I understand your prefix is at ~/rfnoc. Being that the case, > > please run: > > > > $ source ~/rfnoc/setup_env.sh > > > > After this your shell will have access to everything which has been > > installed in that prefix, and you should be able to start > > gnuradio-companion. Please have in mind that you have to set up this > > environment in every new shell you start. > > > > Please let us know if this doesn't work so that we can look further > > into it. > > > > Cheers, > > > > - Nicolas > > > > On Wed, Jan 18, 2017 at 9:58 AM, Usman Haider > > <usmanhaide...@gmail.com <mailto:usmanhaide...@gmail.com> > <mailto:usmanhaide...@gmail.com <mailto:usmanhaide...@gmail.com>>> > wrote: > > > > Yes, could be the cause. After running the following commands > > > > $ cd ~/rfnoc > > $ source ./setup_env.sh > > $ uhd_images_downloader > > > > I was able to download the images. But when I tried to run > > > > |$ gnuradio-companion| > > > > It failed giving "The program 'gnuradio-companion' is > currently > > not installed. You can install it by typing: sudo apt-get > > install gnuradio". Although, I have > > > > $ gnuradio-config-info --v > > v3.7.10.1-202-g6225e5d4 > > > > $ gnuradio-config-info --prefix > > /home/emb/rfnoc > > > > Otuput of PyBOMBS is as under. > > > > $ pybombs prefix init ~/rfnoc -R rfnoc -a rfnoc > > PyBOMBS - INFO - PyBOMBS Version 2.3.1a > > PyBOMBS.prefix - INFO - Creating directory `/home/emb/rfnoc' > > Alias `rfnoc' already exists, overwrite Y/[N]? y > > PyBOMBS.ConfigManager - INFO - Creating new config file > > /home/emb/rfnoc/.pybombs/config.yml > > PyBOMBS.prefix - INFO - Installing default packages for > prefix... > > PyBOMBS.prefix - INFO - > > - gnuradio > > - uhd > > - gr-ettus > > - uhd-fpga > > PyBOMBS.install_manager - INFO - Phase 1: Creating install > tree > > and installing binary packages: > > DEPRECATION: The default format will switch to columns in the > > future. You can use --format=(legacy|columns) (or define a > > format=(legacy|columns) in your pip.conf under the [list] > > section) to disable this warning. > > Install tree: > > | > > +- uhd-fpga > > | > > \- gr-ettus > > | > > +- uhd > > | > > \- gnuradio > > | > > +- uhd > > | > > \- apache-thrift > > PyBOMBS.install_manager - INFO - Phase 2: Recursively > installing > > source packages to prefix: > > PyBOMBS.install_manager - INFO - Installing package: > apache-thrift > > Cloning: (100%) > > [=========================================================]] > > Cloning: (100%) > > [=========================================================] > > Configuring: (100%) > > [=========================================================] > > Building: (100%) > > [=========================================================] > > Installing: (100%) > > [=========================================================] > > PyBOMBS.install_manager - INFO - Installation successful. > > PyBOMBS.install_manager - INFO - Installing package: uhd > > Cloning: (100%) > > [=========================================================]] > > Configuring: (100%) > > [=========================================================] > > Building: (100%) > > [=========================================================] > > Installing: (100%) > > [=========================================================] > > PyBOMBS.install_manager - INFO - Installation successful. > > PyBOMBS.install_manager - INFO - Installing package: gnuradio > > Cloning: (100%) > > [=========================================================]] > > Configuring: (100%) > > [=========================================================] > > Building: (100%) > > [=========================================================] > > Installing: (100%) > > [=========================================================] > > PyBOMBS.install_manager - INFO - Installation successful. > > PyBOMBS.install_manager - INFO - Installing package: gr-ettus > > Cloning: (100%) > > [=========================================================] > > Configuring: (100%) > > [=========================================================] > > Building: (100%) > > [=========================================================] > > Installing: (100%) > > [=========================================================] > > PyBOMBS.install_manager - INFO - Installation successful. > > PyBOMBS.install_manager - INFO - Installing package: uhd-fpga > > Cloning: (100%) > > [=========================================================]] > > Configuring: (100%) > > [=========================================================] > > Building: (100%) > > [=========================================================] > > Installing: (100%) > > [=========================================================] > > PyBOMBS.install_manager - INFO - Installation successful. > > > > > > Any pointers? :) > > > > -- > > Usman > > > > > > On Tue, Jan 17, 2017 at 4:47 PM, Marcus Müller > > <marcus.muel...@ettus.com <mailto:marcus.muel...@ettus.com> > <mailto:marcus.muel...@ettus.com <mailto:marcus.muel...@ettus.com>>> > wrote: > > > > Possibly just a temporary failure then; github or your > > network might have had problems :) > > > > Cheers, > > > > Marcus > > > > > > On 17.01.2017 08:01, Usman Haider wrote: > >> Hello Marcus, > >> > >> I am surprised the following command ran successfully. > >> > >> $ pybombs -vv recipes add gr-recipes > >> git+https://github.com/gnuradio/gr-recipes.git > <https://github.com/gnuradio/gr-recipes.git> > >> <https://github.com/gnuradio/gr-recipes.git > <https://github.com/gnuradio/gr-recipes.git>> > >> > >> -- > >> Usman > >> > >> On Mon, Jan 16, 2017 at 5:10 PM, Marcus Müller > >> <marcus.muel...@ettus.com <mailto:marcus.muel...@ettus.com> > >> <mailto:marcus.muel...@ettus.com > <mailto:marcus.muel...@ettus.com>>> wrote: > >> > >> Hm, interesting. Could you run your pybombs command > >> with "-vv"? > >> > >> Best regards, > >> > >> Marcus > >> > >> On 01/16/2017 12:55 PM, Usman Haider wrote: > >>> Hello Nicolas, > >>> > >>> Thanks for your reply. I have sufficient disk space, > >>> more than 400 GB, so that is not an issue. I do not > >>> have any .gitconfig file in my home directory. I can > >>> download the recipes manually using the command you > >>> mentioned. > >>> > >>> git clone https://github.com/gnuradio/gr-recipes.git > <https://github.com/gnuradio/gr-recipes.git> > >>> <https://github.com/gnuradio/gr-recipes.git > <https://github.com/gnuradio/gr-recipes.git>> gr-recipes > >>> > >>> > >>> Please let me know if you need any further > >>> information. Thanks. > >>> > >>> -- > >>> Usman > >>> > >>> On Mon, Jan 16, 2017 at 3:21 PM, Nicolas Cuervo > >>> <nicolas.cue...@ettus.com > <mailto:nicolas.cue...@ettus.com> > >>> <mailto:nicolas.cue...@ettus.com > <mailto:nicolas.cue...@ettus.com>>> wrote: > >>> > >>> Hello Usman, > >>> > >>> uhm, this is odd. So far I can see the > command is > >>> correct. Although error 128 means that git did > >>> not exit cleanly, and I just run it and it ran > >>> fine. Just some guesses for now: > >>> > >>> 1. Do you have enough disk space? the recipes do > >>> not require a lot of disk space, though, but not > >>> enough space would lead to this. > >>> 2. Do you have specific cloning configuration in > >>> your gitconfig? you can check this by typing: > >>> git config --global --edit > >>> > >>> or just by editing .gitconfig which is normally > >>> located at your home directory. > >>> 3. Can you clone anything else manually? you can > >>> try running: > >>> > >>> git clone > >>> https://github.com/gnuradio/gr-recipes.git > <https://github.com/gnuradio/gr-recipes.git> > >>> <https://github.com/gnuradio/gr-recipes.git > <https://github.com/gnuradio/gr-recipes.git>> > >>> gr-recipes > >>> > >>> just as a test that your git is working as > >>> expected. > >>> > >>> Please let us know if you find out something > with > >>> this hypothesis I mentioned. > >>> > >>> Cheers, > >>> > >>> - Nicolas > >>> > >>> > >>> > >>> > >>> On Mon, Jan 16, 2017 at 9:46 AM, Usman Haider > >>> <usmanhaide...@gmail.com > <mailto:usmanhaide...@gmail.com> > >>> <mailto:usmanhaide...@gmail.com > <mailto:usmanhaide...@gmail.com>>> wrote: > >>> > >>> I am following this guide to get started > with > >>> RFNoC. I am using Ubuntu 14.04 and I ran > >>> following commands > >>> > >>> $ sudo apt-get install git > >>> $ sudo apt-get install python-setuptools > python-dev build-essential > >>> $ sudo easy_install pip > >>> $ sudo pip install > git+https://github.com/gnuradio/pybombs.git > <https://github.com/gnuradio/pybombs.git> > >>> <https://github.com/gnuradio/pybombs.git > <https://github.com/gnuradio/pybombs.git>> > >>> > >>> When I run following command > >>> > >>> $ pybombs -v recipes add gr-recipes > git+https://github.com/gnuradio/gr-recipes.git > <https://github.com/gnuradio/gr-recipes.git> > >>> > <https://github.com/gnuradio/gr-recipes.git > <https://github.com/gnuradio/gr-recipes.git>> > >>> > >>> I get output. > >>> ..... ..... ..... OMBS.PackageManager - > DEBUG > >>> - Checking if package git is installed... > >>> PyBOMBS.Packager.apt - DEBUG - Package git > >>> has version 1.9.1 installed > >>> PyBOMBS.install_manager - DEBUG - Phase 2: > >>> Recursively installing source packages to > >>> prefix: PyBOMBS.Fetcher.git - DEBUG - > >>> Requirements met. PyBOMBS.Fetcher.git - > DEBUG > >>> - Using url - > >>> > https://github.com/gnuradio/gr-recipes.git > <https://github.com/gnuradio/gr-recipes.git> > >>> > <https://github.com/gnuradio/gr-recipes.git > <https://github.com/gnuradio/gr-recipes.git>> > >>> PyBOMBS._process_thread() - DEBUG - > Executing > >>> command `git clone > >>> > https://github.com/gnuradio/gr-recipes.git > <https://github.com/gnuradio/gr-recipes.git> > >>> > <https://github.com/gnuradio/gr-recipes.git > <https://github.com/gnuradio/gr-recipes.git>> > >>> gr-recipes' Cloning: [ > >>> PyBOMBS.recipes - ERROR - Could not fetch > >>> recipesCloning: [ PyBOMBS.recipes - > ERROR > >>> - Could not fetch recipes: Process > >>> returnCloning: (100%) > >>> > [=========================================================] > >>> PyBOMBS.monitor_process() - DEBUG - Thread > >>> signaled termination or returned > >>> PyBOMBS.monitor_process() - DEBUG - Return > >>> value: 128 PyBOMBS.recipes - ERROR - Could > >>> not fetch recipes: Process returned > value: 128 > >>> What could be the issue? pybombs version is > >>> 2.3.1a. Thanks -- > >>> Usman > >>> > _______________________________________________ > >>> Discuss-gnuradio mailing list > >>> Discuss-gnuradio@gnu.org > <mailto:Discuss-gnuradio@gnu.org> > >>> <mailto:Discuss-gnuradio@gnu.org > <mailto:Discuss-gnuradio@gnu.org>> > >>> > https://lists.gnu.org/mailman/listinfo/discuss-gnuradio > <https://lists.gnu.org/mailman/listinfo/discuss-gnuradio> > >>> > <https://lists.gnu.org/mailman/listinfo/discuss-gnuradio > <https://lists.gnu.org/mailman/listinfo/discuss-gnuradio>> > >>> > >>> > >>> _______________________________________________ > >>> Discuss-gnuradio mailing list > >>> Discuss-gnuradio@gnu.org > <mailto:Discuss-gnuradio@gnu.org> > >>> <mailto:Discuss-gnuradio@gnu.org > <mailto:Discuss-gnuradio@gnu.org>> > >>> > https://lists.gnu.org/mailman/listinfo/discuss-gnuradio > <https://lists.gnu.org/mailman/listinfo/discuss-gnuradio> > >>> > <https://lists.gnu.org/mailman/listinfo/discuss-gnuradio > <https://lists.gnu.org/mailman/listinfo/discuss-gnuradio>> > >> _______________________________________________ > >> Discuss-gnuradio mailing list Discuss-gnuradio@gnu.org > <mailto:Discuss-gnuradio@gnu.org> > >> <mailto:Discuss-gnuradio@gnu.org > <mailto:Discuss-gnuradio@gnu.org>> > >> > https://lists.gnu.org/mailman/listinfo/discuss-gnuradio > <https://lists.gnu.org/mailman/listinfo/discuss-gnuradio> > <https://lists.gnu.org/mailman/listinfo/discuss-gnuradio > <https://lists.gnu.org/mailman/listinfo/discuss-gnuradio>> > >> > >> > > > > > > _______________________________________________ > > Discuss-gnuradio mailing list > > Discuss-gnuradio@gnu.org <mailto:Discuss-gnuradio@gnu.org> > <mailto:Discuss-gnuradio@gnu.org <mailto:Discuss-gnuradio@gnu.org>> > > https://lists.gnu.org/mailman/listinfo/discuss-gnuradio > <https://lists.gnu.org/mailman/listinfo/discuss-gnuradio> > > <https://lists.gnu.org/mailman/listinfo/discuss-gnuradio > <https://lists.gnu.org/mailman/listinfo/discuss-gnuradio>> > > > > > > > > > > > > _______________________________________________ > > Discuss-gnuradio mailing list > > Discuss-gnuradio@gnu.org <mailto:Discuss-gnuradio@gnu.org> > > https://lists.gnu.org/mailman/listinfo/discuss-gnuradio > <https://lists.gnu.org/mailman/listinfo/discuss-gnuradio> > > > > > _______________________________________________ > Discuss-gnuradio mailing list > Discuss-gnuradio@gnu.org <mailto:Discuss-gnuradio@gnu.org> > https://lists.gnu.org/mailman/listinfo/discuss-gnuradio > <https://lists.gnu.org/mailman/listinfo/discuss-gnuradio> > > _______________________________________________ Discuss-gnuradio mailing list Discuss-gnuradio@gnu.org https://lists.gnu.org/mailman/listinfo/discuss-gnuradio
