Hi, What is recommend to fix the issue? Should I go for source install instead of PyBombs?
-- Usman On Fri, Jan 20, 2017 at 10:58 AM, Usman Haider <usmanhaide...@gmail.com> wrote: > Hi Martin, > > I see from output of the command that a lot of components are disabled. > > -- ###################################################### > -- # Gnuradio disabled components > -- ###################################################### > -- * python-support > -- * doxygen > -- * sphinx > -- * gr-ctrlport > -- * gnuradio-companion > -- * gr-comedi > -- * gr-utils > -- * gr-video-sdl > -- * gr-wxgui > > Looking further I found that PyBombs was unable to find SWIG as well. I > remember that PyBombs install all the required dependencies itself? Do I > have to reinstall everything from scratch? Following is the output of the > command > $ pybombs -vv rebuild gnuradio > > http://pasted.co/9ebaa709 > > Thanks. > > -- > Usman > > On Thu, Jan 19, 2017 at 10:25 PM, Martin Braun <martin.br...@ettus.com> > wrote: > >> It did not install GRC, and no other graphical tools either. Rerun >> >> $ pybombs -vv rebuild gnuradio >> >> to see where it fails during cmake. >> >> Cheers, >> Martin >> >> On 01/18/2017 10:35 PM, Usman Haider wrote: >> > Hi Martin, >> > >> > Yeah. Please find below the output >> > >> > $ ls ~/rfnoc/bin >> > >> > gnuradio-config-info >> > uhd_cal_tx_iq_balance >> > usrp2_card_burner >> > octoclock_firmware_burner >> > uhd_config_info >> > usrp_n2xx_simple_net_burner >> > rfnocmodtool >> > uhd_find_devices >> > usrp_x3xx_fpga_burner >> > thrift >> > uhd_image_loader >> > volk-config-info >> > uhd_cal_rx_iq_balance >> > uhd_images_downloader >> > volk_modtool >> > uhd_cal_tx_dc_offset >> > uhd_usrp_probe >> > volk_profile >> > >> > $ pybombs inv >> > >> > PyBOMBS - INFO - PyBOMBS Version 2.3.1a >> > Showing package state: >> > uhd-fpga: installed >> > uhd: installed >> > apache-thrift: installed >> > gnuradio: installed >> > gr-ettus: installed >> > >> > >> > You get anything from this? Thanks >> > >> > -- >> > Usman >> > >> > On Thu, Jan 19, 2017 at 5:15 AM, Martin Braun <martin.br...@ettus.com >> > <mailto:martin.br...@ettus.com>> wrote: >> > >> > It's almost as if UHD installed, but GNU Radio didn't, although your >> > output says otherwise. >> > >> > What does >> > >> > $ ls ~/rfnoc/bin >> > >> > look like? >> > >> > Or >> > >> > $ pybombs inv >> > >> > ? >> > >> > On 01/18/2017 02:10 AM, Usman Haider wrote: >> > > Hi Nicolas, >> > > >> > > Thanks for your time. I did that but the result is same. I can run >> > > >> > > |$|uhd_images_downloader >> > > but >> > > |$ gnuradio-companion >> > > | >> > > >> > > fails. Let me know if any further information is needed. Thanks >> > > >> > > -- >> > > Usman >> > > On Wed, Jan 18, 2017 at 2:11 PM, Nicolas Cuervo >> > > <nicolas.cue...@ettus.com <mailto:nicolas.cue...@ettus.com> >> > <mailto:nicolas.cue...@ettus.com <mailto:nicolas.cue...@ettus.com >> >>> >> > wrote: >> > > >> > > Hello Usman, >> > > >> > > Did you set up your PyBOMBS environment? If not, please do >> so. As >> > > long as I understand your prefix is at ~/rfnoc. Being that >> the case, >> > > please run: >> > > >> > > $ source ~/rfnoc/setup_env.sh >> > > >> > > After this your shell will have access to everything which >> has been >> > > installed in that prefix, and you should be able to start >> > > gnuradio-companion. Please have in mind that you have to set >> up this >> > > environment in every new shell you start. >> > > >> > > Please let us know if this doesn't work so that we can look >> further >> > > into it. >> > > >> > > Cheers, >> > > >> > > - Nicolas >> > > >> > > On Wed, Jan 18, 2017 at 9:58 AM, Usman Haider >> > > <usmanhaide...@gmail.com <mailto:usmanhaide...@gmail.com> >> > <mailto:usmanhaide...@gmail.com <mailto:usmanhaide...@gmail.com>>> >> > wrote: >> > > >> > > Yes, could be the cause. After running the following >> commands >> > > >> > > $ cd ~/rfnoc >> > > $ source ./setup_env.sh >> > > $ uhd_images_downloader >> > > >> > > I was able to download the images. But when I tried to run >> > > >> > > |$ gnuradio-companion| >> > > >> > > It failed giving "The program 'gnuradio-companion' is >> > currently >> > > not installed. You can install it by typing: sudo apt-get >> > > install gnuradio". Although, I have >> > > >> > > $ gnuradio-config-info --v >> > > v3.7.10.1-202-g6225e5d4 >> > > >> > > $ gnuradio-config-info --prefix >> > > /home/emb/rfnoc >> > > >> > > Otuput of PyBOMBS is as under. >> > > >> > > $ pybombs prefix init ~/rfnoc -R rfnoc -a rfnoc >> > > PyBOMBS - INFO - PyBOMBS Version 2.3.1a >> > > PyBOMBS.prefix - INFO - Creating directory >> `/home/emb/rfnoc' >> > > Alias `rfnoc' already exists, overwrite Y/[N]? y >> > > PyBOMBS.ConfigManager - INFO - Creating new config file >> > > /home/emb/rfnoc/.pybombs/config.yml >> > > PyBOMBS.prefix - INFO - Installing default packages for >> > prefix... >> > > PyBOMBS.prefix - INFO - >> > > - gnuradio >> > > - uhd >> > > - gr-ettus >> > > - uhd-fpga >> > > PyBOMBS.install_manager - INFO - Phase 1: Creating install >> > tree >> > > and installing binary packages: >> > > DEPRECATION: The default format will switch to columns in >> the >> > > future. You can use --format=(legacy|columns) (or define a >> > > format=(legacy|columns) in your pip.conf under the [list] >> > > section) to disable this warning. >> > > Install tree: >> > > | >> > > +- uhd-fpga >> > > | >> > > \- gr-ettus >> > > | >> > > +- uhd >> > > | >> > > \- gnuradio >> > > | >> > > +- uhd >> > > | >> > > \- apache-thrift >> > > PyBOMBS.install_manager - INFO - Phase 2: Recursively >> > installing >> > > source packages to prefix: >> > > PyBOMBS.install_manager - INFO - Installing package: >> > apache-thrift >> > > Cloning: (100%) >> > > [============================ >> =============================]] >> > > Cloning: (100%) >> > > [============================ >> =============================] >> > > Configuring: (100%) >> > > [============================ >> =============================] >> > > Building: (100%) >> > > [============================ >> =============================] >> > > Installing: (100%) >> > > [============================ >> =============================] >> > > PyBOMBS.install_manager - INFO - Installation successful. >> > > PyBOMBS.install_manager - INFO - Installing package: uhd >> > > Cloning: (100%) >> > > [============================ >> =============================]] >> > > Configuring: (100%) >> > > [============================ >> =============================] >> > > Building: (100%) >> > > [============================ >> =============================] >> > > Installing: (100%) >> > > [============================ >> =============================] >> > > PyBOMBS.install_manager - INFO - Installation successful. >> > > PyBOMBS.install_manager - INFO - Installing package: >> gnuradio >> > > Cloning: (100%) >> > > [============================ >> =============================]] >> > > Configuring: (100%) >> > > [============================ >> =============================] >> > > Building: (100%) >> > > [============================ >> =============================] >> > > Installing: (100%) >> > > [============================ >> =============================] >> > > PyBOMBS.install_manager - INFO - Installation successful. >> > > PyBOMBS.install_manager - INFO - Installing package: >> gr-ettus >> > > Cloning: (100%) >> > > [============================ >> =============================] >> > > Configuring: (100%) >> > > [============================ >> =============================] >> > > Building: (100%) >> > > [============================ >> =============================] >> > > Installing: (100%) >> > > [============================ >> =============================] >> > > PyBOMBS.install_manager - INFO - Installation successful. >> > > PyBOMBS.install_manager - INFO - Installing package: >> uhd-fpga >> > > Cloning: (100%) >> > > [============================ >> =============================]] >> > > Configuring: (100%) >> > > [============================ >> =============================] >> > > Building: (100%) >> > > [============================ >> =============================] >> > > Installing: (100%) >> > > [============================ >> =============================] >> > > PyBOMBS.install_manager - INFO - Installation successful. >> > > >> > > >> > > Any pointers? :) >> > > >> > > -- >> > > Usman >> > > >> > > >> > > On Tue, Jan 17, 2017 at 4:47 PM, Marcus Müller >> > > <marcus.muel...@ettus.com <mailto:marcus.mueller@ettus.c >> om> >> > <mailto:marcus.muel...@ettus.com <mailto:marcus.muel...@ettus.com >> >>> >> > wrote: >> > > >> > > Possibly just a temporary failure then; github or your >> > > network might have had problems :) >> > > >> > > Cheers, >> > > >> > > Marcus >> > > >> > > >> > > On 17.01.2017 08:01, Usman Haider wrote: >> > >> Hello Marcus, >> > >> >> > >> I am surprised the following command ran >> successfully. >> > >> >> > >> $ pybombs -vv recipes add gr-recipes >> > >> git+https://github.com/gnuradio/gr-recipes.git >> > <https://github.com/gnuradio/gr-recipes.git> >> > >> <https://github.com/gnuradio/gr-recipes.git >> > <https://github.com/gnuradio/gr-recipes.git>> >> > >> >> > >> -- >> > >> Usman >> > >> >> > >> On Mon, Jan 16, 2017 at 5:10 PM, Marcus Müller >> > >> <marcus.muel...@ettus.com <mailto: >> marcus.muel...@ettus.com> >> > >> <mailto:marcus.muel...@ettus.com <mailto: >> marcus.muel...@ettus.com>>> wrote: >> > >> >> > >> Hm, interesting. Could you run your pybombs >> command >> > >> with "-vv"? >> > >> >> > >> Best regards, >> > >> >> > >> Marcus >> > >> >> > >> On 01/16/2017 12:55 PM, Usman Haider wrote: >> > >>> Hello Nicolas, >> > >>> >> > >>> Thanks for your reply. I have sufficient disk >> space, >> > >>> more than 400 GB, so that is not an issue. I >> do not >> > >>> have any .gitconfig file in my home directory. >> I can >> > >>> download the recipes manually using the command >> you >> > >>> mentioned. >> > >>> >> > >>> git clone https://github.com/gnuradio/gr >> -recipes.git >> > <https://github.com/gnuradio/gr-recipes.git> >> > >>> <https://github.com/gnuradio/gr-recipes.git >> > <https://github.com/gnuradio/gr-recipes.git>> gr-recipes >> > >>> >> > >>> >> > >>> Please let me know if you need any further >> > >>> information. Thanks. >> > >>> >> > >>> -- >> > >>> Usman >> > >>> >> > >>> On Mon, Jan 16, 2017 at 3:21 PM, Nicolas Cuervo >> > >>> <nicolas.cue...@ettus.com <mailto: >> nicolas.cue...@ettus.com> >> > >>> <mailto:nicolas.cue...@ettus.com >> > <mailto:nicolas.cue...@ettus.com>>> wrote: >> > >>> >> > >>> Hello Usman, >> > >>> >> > >>> uhm, this is odd. So far I can see the >> > command is >> > >>> correct. Although error 128 means that git >> did >> > >>> not exit cleanly, and I just run it and it >> ran >> > >>> fine. Just some guesses for now: >> > >>> >> > >>> 1. Do you have enough disk space? the >> recipes do >> > >>> not require a lot of disk space, though, >> but not >> > >>> enough space would lead to this. >> > >>> 2. Do you have specific cloning >> configuration in >> > >>> your gitconfig? you can check this by >> typing: >> > >>> git config --global --edit >> > >>> >> > >>> or just by editing .gitconfig which is >> normally >> > >>> located at your home directory. >> > >>> 3. Can you clone anything else manually? >> you can >> > >>> try running: >> > >>> >> > >>> git clone >> > >>> https://github.com/gnuradio/gr-recipes.git >> > <https://github.com/gnuradio/gr-recipes.git> >> > >>> <https://github.com/gnuradio/gr-recipes.git >> > <https://github.com/gnuradio/gr-recipes.git>> >> > >>> gr-recipes >> > >>> >> > >>> just as a test that your git is working as >> > >>> expected. >> > >>> >> > >>> Please let us know if you find out something >> > with >> > >>> this hypothesis I mentioned. >> > >>> >> > >>> Cheers, >> > >>> >> > >>> - Nicolas >> > >>> >> > >>> >> > >>> >> > >>> >> > >>> On Mon, Jan 16, 2017 at 9:46 AM, Usman >> Haider >> > >>> <usmanhaide...@gmail.com >> > <mailto:usmanhaide...@gmail.com> >> > >>> <mailto:usmanhaide...@gmail.com >> > <mailto:usmanhaide...@gmail.com>>> wrote: >> > >>> >> > >>> I am following this guide to get started >> > with >> > >>> RFNoC. I am using Ubuntu 14.04 and I >> ran >> > >>> following commands >> > >>> >> > >>> $ sudo apt-get install git >> > >>> $ sudo apt-get install python-setuptools >> > python-dev build-essential >> > >>> $ sudo easy_install pip >> > >>> $ sudo pip install >> > git+https://github.com/gnuradio/pybombs.git >> > <https://github.com/gnuradio/pybombs.git> >> > >>> <https://github.com/gnuradio/ >> pybombs.git >> > <https://github.com/gnuradio/pybombs.git>> >> > >>> >> > >>> When I run following command >> > >>> >> > >>> $ pybombs -v recipes add gr-recipes >> > git+https://github.com/gnuradio/gr-recipes.git >> > <https://github.com/gnuradio/gr-recipes.git> >> > >>> >> > <https://github.com/gnuradio/gr-recipes.git >> > <https://github.com/gnuradio/gr-recipes.git>> >> > >>> >> > >>> I get output. >> > >>> ..... ..... ..... OMBS.PackageManager - >> > DEBUG >> > >>> - Checking if package git is >> installed... >> > >>> PyBOMBS.Packager.apt - DEBUG - Package >> git >> > >>> has version 1.9.1 installed >> > >>> PyBOMBS.install_manager - DEBUG - Phase >> 2: >> > >>> Recursively installing source packages >> to >> > >>> prefix: PyBOMBS.Fetcher.git - DEBUG - >> > >>> Requirements met. PyBOMBS.Fetcher.git - >> > DEBUG >> > >>> - Using url - >> > >>> >> > https://github.com/gnuradio/gr-recipes.git >> > <https://github.com/gnuradio/gr-recipes.git> >> > >>> >> > <https://github.com/gnuradio/gr-recipes.git >> > <https://github.com/gnuradio/gr-recipes.git>> >> > >>> PyBOMBS._process_thread() - DEBUG - >> > Executing >> > >>> command `git clone >> > >>> >> > https://github.com/gnuradio/gr-recipes.git >> > <https://github.com/gnuradio/gr-recipes.git> >> > >>> >> > <https://github.com/gnuradio/gr-recipes.git >> > <https://github.com/gnuradio/gr-recipes.git>> >> > >>> gr-recipes' Cloning: [ >> > >>> PyBOMBS.recipes - ERROR - Could not >> fetch >> > >>> recipesCloning: [ PyBOMBS.recipes - >> > ERROR >> > >>> - Could not fetch recipes: Process >> > >>> returnCloning: (100%) >> > >>> >> > [=========================================================] >> > >>> PyBOMBS.monitor_process() - DEBUG - >> Thread >> > >>> signaled termination or returned >> > >>> PyBOMBS.monitor_process() - DEBUG - >> Return >> > >>> value: 128 PyBOMBS.recipes - ERROR - >> Could >> > >>> not fetch recipes: Process returned >> > value: 128 >> > >>> What could be the issue? pybombs >> version is >> > >>> 2.3.1a. Thanks -- >> > >>> Usman >> > >>> >> > _______________________________________________ >> > >>> Discuss-gnuradio mailing list >> > >>> Discuss-gnuradio@gnu.org >> > <mailto:Discuss-gnuradio@gnu.org> >> > >>> <mailto:Discuss-gnuradio@gnu.org >> > <mailto:Discuss-gnuradio@gnu.org>> >> > >>> >> > https://lists.gnu.org/mailman/listinfo/discuss-gnuradio >> > <https://lists.gnu.org/mailman/listinfo/discuss-gnuradio> >> > >>> <https://lists.gnu.org/mailma >> n/listinfo/discuss-gnuradio >> > <https://lists.gnu.org/mailman/listinfo/discuss-gnuradio>> >> > >>> >> > >>> >> > >>> _______________________________________________ >> > >>> Discuss-gnuradio mailing list >> > >>> Discuss-gnuradio@gnu.org <mailto: >> Discuss-gnuradio@gnu.org> >> > >>> <mailto:Discuss-gnuradio@gnu.org >> > <mailto:Discuss-gnuradio@gnu.org>> >> > >>> >> > https://lists.gnu.org/mailman/listinfo/discuss-gnuradio >> > <https://lists.gnu.org/mailman/listinfo/discuss-gnuradio> >> > >>> <https://lists.gnu.org/mailma >> n/listinfo/discuss-gnuradio >> > <https://lists.gnu.org/mailman/listinfo/discuss-gnuradio>> >> > >> _______________________________________________ >> > >> Discuss-gnuradio mailing list >> Discuss-gnuradio@gnu.org <mailto:Discuss-gnuradio@gnu.org> >> > >> <mailto:Discuss-gnuradio@gnu.org >> > <mailto:Discuss-gnuradio@gnu.org>> >> > >> >> > https://lists.gnu.org/mailman/listinfo/discuss-gnuradio >> > <https://lists.gnu.org/mailman/listinfo/discuss-gnuradio> >> > <https://lists.gnu.org/mailman/listinfo/discuss-gnuradio >> > <https://lists.gnu.org/mailman/listinfo/discuss-gnuradio>> >> > >> >> > >> >> > > >> > > >> > > _______________________________________________ >> > > Discuss-gnuradio mailing list >> > > Discuss-gnuradio@gnu.org <mailto:Discuss-gnuradio@gnu.org >> > >> > <mailto:Discuss-gnuradio@gnu.org <mailto:Discuss-gnuradio@gnu.org>> >> > > https://lists.gnu.org/mailman/listinfo/discuss-gnuradio >> > <https://lists.gnu.org/mailman/listinfo/discuss-gnuradio> >> > > <https://lists.gnu.org/mailman/listinfo/discuss-gnuradio >> > <https://lists.gnu.org/mailman/listinfo/discuss-gnuradio>> >> > > >> > > >> > > >> > > >> > > >> > > _______________________________________________ >> > > Discuss-gnuradio mailing list >> > > Discuss-gnuradio@gnu.org <mailto:Discuss-gnuradio@gnu.org> >> > > https://lists.gnu.org/mailman/listinfo/discuss-gnuradio >> > <https://lists.gnu.org/mailman/listinfo/discuss-gnuradio> >> > > >> > >> > >> > _______________________________________________ >> > Discuss-gnuradio mailing list >> > Discuss-gnuradio@gnu.org <mailto:Discuss-gnuradio@gnu.org> >> > https://lists.gnu.org/mailman/listinfo/discuss-gnuradio >> > <https://lists.gnu.org/mailman/listinfo/discuss-gnuradio> >> > >> > >> >> >> _______________________________________________ >> Discuss-gnuradio mailing list >> Discuss-gnuradio@gnu.org >> https://lists.gnu.org/mailman/listinfo/discuss-gnuradio >> > >
_______________________________________________ Discuss-gnuradio mailing list Discuss-gnuradio@gnu.org https://lists.gnu.org/mailman/listinfo/discuss-gnuradio
