My UHD version is UHD_003.004.000-325-g7e296167 I opened up my USRP N210s and it seems like on each board it says two different rev numbers.
On all boards it shows WBX Board Rev. 2 on the main board while on the connector board (the board with the RX and TX connectors on it) it says WBX-FE-Simple Board Rev 4.0. I think my boards are about a year old. I installed gnuradio and uhd this saturday. - Jan Marcus D. Leech wrote: > > > > What version of UHD are you running? And what approximate age are > the WBX? > > The Rev 3 WBX is somewhat different than Rev 2, so you need > to make sure that you have the latest host-side UHD and matching > firmware to properly support Rev 3 WBX. > > There was a (transient) bug in > the calibration routines that was found last week, but it's fixed in the > most recent UHD host-side. > > I used the cal routines on my USRP2+WBX > just this past weekeend and they worked just fine. So perhaps you have > the transiently-broken version of UHD. > > Perhaps Josh can comment--I > don't have the GIT tags of the broken instance at my fingertips right > now. > > On Mon, 19 Mar 2012 08:36:43 -0700 (PDT), sirjanselot wrote: > >> > Hello, >> >> I reran the command for each individual USRP radio > connected. >> >> Two of my USRP N210s have this output: >> >> Error: RX > dboard has empty serial! >> >> One of my USRP N210 has this output: >> > Error: timed out waiting for TX and/or RX LO to lock >> >> and the > USRP1: >> >> Error: self-calibration is not supported for this > hardware. >> >> I can understand if the self-calibration is not supported > for the USRP1. >> >> However, for the USRP N210s I would like these > fixed. I ran uhd_usrp_probe >> and it seems like by dboard has a serial. > It says TX Dboard: A ID: >> WBX(0x0052). >> >> Is there a bug in the > calibration routines? >> >> Marcus D. Leech wrote: >>> When you have more > than one USRP device connected to your system, you really should be > explicit about which device you want to address, using the "--args" > option. For your N210 it would be "--args addr=192.168.X.Y" and for your > USRP1 it would be "type=usrp1" Otherwise, it just grabs the first USRP > device it finds. On Mon, 19 Mar 2012 07:47:03 -0700 (PDT), sirjanselot > wrote: >>> >>>> Hello, I was >>> running the calibration routines for 3 > USRP N210s and one 1 USRP >>> >>>> >>> radio. I had them all connected > at once to my computer and all of a sudden it >>> >>>> ow do I fix > this? >>> -left:#1010ff 2px solid; margin-left:5px; width:100%"> Does the > calibration routines run for all of them @ once, when I call the - Jan > _______________________________________________ Discuss-gnuradio mailing > list > > > _______________________________________________ > Discuss-gnuradio mailing list > Discuss-gnuradio@gnu.org > https://lists.gnu.org/mailman/listinfo/discuss-gnuradio > > -- View this message in context: http://old.nabble.com/Rx-dBoard-has-empty-serial-tp33532071p33532855.html Sent from the GnuRadio mailing list archive at Nabble.com. _______________________________________________ Discuss-gnuradio mailing list Discuss-gnuradio@gnu.org https://lists.gnu.org/mailman/listinfo/discuss-gnuradio
