What version of UHD are you running? And what approximate age are the WBX?
The Rev 3 WBX is somewhat different than Rev 2, so you need to make sure that you have the latest host-side UHD and matching firmware to properly support Rev 3 WBX. There was a (transient) bug in the calibration routines that was found last week, but it's fixed in the most recent UHD host-side. I used the cal routines on my USRP2+WBX just this past weekeend and they worked just fine. So perhaps you have the transiently-broken version of UHD. Perhaps Josh can comment--I don't have the GIT tags of the broken instance at my fingertips right now. On Mon, 19 Mar 2012 08:36:43 -0700 (PDT), sirjanselot wrote: > Hello, > > I reran the command for each individual USRP radio connected. > > Two of my USRP N210s have this output: > > Error: RX dboard has empty serial! > > One of my USRP N210 has this output: > Error: timed out waiting for TX and/or RX LO to lock > > and the USRP1: > > Error: self-calibration is not supported for this hardware. > > I can understand if the self-calibration is not supported for the USRP1. > > However, for the USRP N210s I would like these fixed. I ran uhd_usrp_probe > and it seems like by dboard has a serial. It says TX Dboard: A ID: > WBX(0x0052). > > Is there a bug in the calibration routines? > > Marcus D. Leech wrote: >> When you have more than one USRP device connected to your system, you really should be explicit about which device you want to address, using the "--args" option. For your N210 it would be "--args addr=192.168.X.Y" and for your USRP1 it would be "type=usrp1" Otherwise, it just grabs the first USRP device it finds. On Mon, 19 Mar 2012 07:47:03 -0700 (PDT), sirjanselot wrote: >> >>> Hello, I was >> running the calibration routines for 3 USRP N210s and one 1 USRP >> >>> >> radio. I had them all connected at once to my computer and all of a sudden it >> >>> ow do I fix this? >> -left:#1010ff 2px solid; margin-left:5px; width:100%"> Does the calibration routines run for all of them @ once, when I call the - Jan _______________________________________________ Discuss-gnuradio mailing list
_______________________________________________ Discuss-gnuradio mailing list Discuss-gnuradio@gnu.org https://lists.gnu.org/mailman/listinfo/discuss-gnuradio
