Hello, I reran the command for each individual USRP radio connected.
Two of my USRP N210s have this output: Error: RX dboard has empty serial! One of my USRP N210 has this output: Error: timed out waiting for TX and/or RX LO to lock and the USRP1: Error: self-calibration is not supported for this hardware. I can understand if the self-calibration is not supported for the USRP1. However, for the USRP N210s I would like these fixed. I ran uhd_usrp_probe and it seems like by dboard has a serial. It says TX Dboard: A ID: WBX(0x0052). Is there a bug in the calibration routines? Marcus D. Leech wrote: > > > > When you have more than one USRP device connected to your system, > you really should be explicit about which device you want to address, > using the "--args" option. > > For your N210 it would be "--args > addr=192.168.X.Y" and for your USRP1 it would be "type=usrp1" > > > Otherwise, it just grabs the first USRP device it finds. > > On Mon, 19 > Mar 2012 07:47:03 -0700 (PDT), sirjanselot wrote: > >> Hello, >> >> I was > running the calibration routines for 3 USRP N210s and one 1 USRP >> > radio. I had them all connected at once to my computer and all of a > sudden >> it says Error: RX dboard has empty serial! >> >> How do I know > which board has an empty serial and how do I fix this? >> >> Does the > calibration routines run for all of them @ once, when I call the >> > program? >> >> - Jan > > > _______________________________________________ > Discuss-gnuradio mailing list > Discuss-gnuradio@gnu.org > https://lists.gnu.org/mailman/listinfo/discuss-gnuradio > > -- View this message in context: http://old.nabble.com/Rx-dBoard-has-empty-serial-tp33532071p33532548.html Sent from the GnuRadio mailing list archive at Nabble.com. _______________________________________________ Discuss-gnuradio mailing list Discuss-gnuradio@gnu.org https://lists.gnu.org/mailman/listinfo/discuss-gnuradio
