Hi Marcus I got the answer for the question in this thread.Actually I was using an outdated version of UHD which doesn't had USRP2 firmwares.Hence during configure it was showing the above error. I just downloaded the latest images and firmwares. I need to ask that whether it is needed to uninstall the older UHD before installing the new one. If yes then will "make uninstall" will work in the directory from which i did "make install" ? or some other way .......
sumitstop wrote: > > Hi Marcus.... I have used your script.Its superb! I just wanted to build > step by step :) > Btw I just got all things build properly.Actually I put mb-gcc in the home > folder and set the path variables accordingly.And it worked :) > > Marcus D. Leech wrote: >> >> On 06/23/2011 06:50 PM, sumitstop wrote: >>> I am using ubuntu Lucid 10.04 LTS. >>> >>> Did the following thing >>> >>> Step-1 Installed all the dependencies for ubuntu Lucid 10.04 from the >>> script >>> given here >>> http://gnuradio.org/redmine/projects/gnuradio/wiki/UbuntuInstall >>> >>> step-2 git clone http://gnuradio.org/git/gnuradio.git >>> then >>> >>> step-3 git clone http://github.com/EttusResearch/UHD-Mirror.git >>> after that >>> >>> step-4 cd gnuradio >>> step-5 ./bootstrap >>> step-6 ./configure >>> >>> I got following messages >>> ********************************************************************* >>> The following components were skipped either because you asked not >>> to build them or they didn't pass configuration checks: >>> >>> usrp2-firmware >>> >>> These components will not be built. >>> >>> >>> ********************************************************************* >>> The following GNU Radio components have been successfully configured: >>> >>> config >>> gruel >>> volk >>> gnuradio-core >>> usrp >>> usrp2 >>> gr-usrp >>> gr-usrp2 >>> gr-msdd6000 >>> gr-audio >>> gr-atsc >>> gr-cvsd-vocoder >>> gr-gpio >>> gr-gsm-fr-vocoder >>> gr-noaa >>> gr-pager >>> gr-radar-mono >>> gr-radio-astronomy >>> gr-trellis >>> gr-video-sdl >>> gr-wxgui >>> gr-qtgui >>> gr-sounder >>> gr-utils >>> gnuradio-examples >>> grc >>> docs >>> >>> You my now run the make command to build these components. >>> >>> ********************************************************************* >>> The following components were skipped either because you asked not >>> to build them or they didn't pass configuration checks: >>> >>> gcell >>> gr-gcell >>> gr-comedi >>> gr-uhd >>> >>> These components will not be built. >>> >>> Configured GNU Radio release v3.4.0-2-g081497e7 for build. >>> >>> ********************************************************************** >>> >>> I searched a lot and found answer to many of questions >>> >>> > From the following link(in the summary) i found that no need to build >>> gr-comedi >>> http://lists.gnu.org/archive/html/discuss-gnuradio/2006-06/msg00225.html >>> >>> Also in the following link I read that gcell and gr-gcell are needed >>> only >>> for IBM cell processor. >>> http://www.ruby-forum.com/topic/201112 >>> >>> So I want to ask what should I do to build >>> >>> gr-uhd and usrp2-firmware >>> >>> I also did >>> >>> ./configure --enable-gr-uhd >>> >>> but it shows following message >>> >>> checking for UHD... no >>> gr-uhd requires libuhd 3.x.x >>> configure: error: Component gr-uhd has errors; stopping. >>> >>> I also did >>> >>> ./configure --enable-usrp2-firmware >>> >>> and got following message >>> >>> checking whether byte ordering is bigendian... no >>> checking for mb-gcc... no >>> usrp2 firmware requires mb-gcc. Not found >>> configure: error: Component usrp2-firmware has errors; stopping. >>> configure: error: ./configure.gnu failed for usrp2/firmware >>> >>> I saw several posts with the same problem but honestly I couldn't >>> understand >>> what to do next. >>> >>> Regards >>> >>> >>> >>> >>> ----- >>> Sumit Kr. >>> Research Assistant >>> Communication Research center >>> IIIT Hyderabad >>> India >> I'll once again do some personal horn-tooting, if y'all can stand it: >> >> http://www.sbrac.org/files/build-gnuradio >> >> >> It takes care of downloading/building UHD+Gnu Radio, including >> downloading the latest firmware, installing pre-requisites, and >> uninstalling >> any installed-from-binary-packages "stuff" that might interfere with >> a "built from source" build of Gnu Radio. >> >> It works for Ubuntu and Fedora recent releases. >> >> It's a shell script. It takes quite a while to run, and generally >> operates as silently as is practical. >> >> >> >> -- >> Marcus Leech >> Principal Investigator >> Shirleys Bay Radio Astronomy Consortium >> http://www.sbrac.org >> >> >> >> _______________________________________________ >> Discuss-gnuradio mailing list >> Discuss-gnuradio@gnu.org >> https://lists.gnu.org/mailman/listinfo/discuss-gnuradio >> >> > > ----- Sumit Kr. Research Assistant Communication Research center IIIT Hyderabad India -- View this message in context: http://old.nabble.com/Reg-%3A-Building-gr-uhd-and-usrp2-firmware-tp31915462p31958690.html Sent from the GnuRadio mailing list archive at Nabble.com. _______________________________________________ Discuss-gnuradio mailing list Discuss-gnuradio@gnu.org https://lists.gnu.org/mailman/listinfo/discuss-gnuradio
