I am using ubuntu Lucid 10.04 LTS. Did the following thing
Step-1 Installed all the dependencies for ubuntu Lucid 10.04 from the script given here http://gnuradio.org/redmine/projects/gnuradio/wiki/UbuntuInstall step-2 git clone http://gnuradio.org/git/gnuradio.git then step-3 git clone http://github.com/EttusResearch/UHD-Mirror.git after that step-4 cd gnuradio step-5 ./bootstrap step-6 ./configure I got following messages ********************************************************************* The following components were skipped either because you asked not to build them or they didn't pass configuration checks: usrp2-firmware These components will not be built. ********************************************************************* The following GNU Radio components have been successfully configured: config gruel volk gnuradio-core usrp usrp2 gr-usrp gr-usrp2 gr-msdd6000 gr-audio gr-atsc gr-cvsd-vocoder gr-gpio gr-gsm-fr-vocoder gr-noaa gr-pager gr-radar-mono gr-radio-astronomy gr-trellis gr-video-sdl gr-wxgui gr-qtgui gr-sounder gr-utils gnuradio-examples grc docs You my now run the make command to build these components. ********************************************************************* The following components were skipped either because you asked not to build them or they didn't pass configuration checks: gcell gr-gcell gr-comedi gr-uhd These components will not be built. Configured GNU Radio release v3.4.0-2-g081497e7 for build. ********************************************************************** I searched a lot and found answer to many of questions >From the following link(in the summary) i found that no need to build gr-comedi http://lists.gnu.org/archive/html/discuss-gnuradio/2006-06/msg00225.html Also in the following link I read that gcell and gr-gcell are needed only for IBM cell processor. http://www.ruby-forum.com/topic/201112 So I want to ask what should I do to build gr-uhd and usrp2-firmware I also did ./configure --enable-gr-uhd but it shows following message checking for UHD... no gr-uhd requires libuhd 3.x.x configure: error: Component gr-uhd has errors; stopping. I also did ./configure --enable-usrp2-firmware and got following message checking whether byte ordering is bigendian... no checking for mb-gcc... no usrp2 firmware requires mb-gcc. Not found configure: error: Component usrp2-firmware has errors; stopping. configure: error: ./configure.gnu failed for usrp2/firmware I saw several posts with the same problem but honestly I couldn't understand what to do next. Regards ----- Sumit Kr. Research Assistant Communication Research center IIIT Hyderabad India -- View this message in context: http://old.nabble.com/Reg-%3A-Building-gr-uhd-and-usrp2-firmware-tp31915462p31915462.html Sent from the GnuRadio mailing list archive at Nabble.com. _______________________________________________ Discuss-gnuradio mailing list Discuss-gnuradio@gnu.org https://lists.gnu.org/mailman/listinfo/discuss-gnuradio
