Did you install UHD before you built gnuradio? You can follow the build guide here: http://www.ettus.com/uhd_docs/manual/html/build.html
Morgan On Thu, Jun 23, 2011 at 3:50 PM, sumitstop <sumit.ku...@research.iiit.ac.in> wrote: > > I am using ubuntu Lucid 10.04 LTS. > > Did the following thing > > Step-1 Installed all the dependencies for ubuntu Lucid 10.04 from the script > given here > http://gnuradio.org/redmine/projects/gnuradio/wiki/UbuntuInstall > > step-2 git clone http://gnuradio.org/git/gnuradio.git > then > > step-3 git clone http://github.com/EttusResearch/UHD-Mirror.git > after that > > step-4 cd gnuradio > step-5 ./bootstrap > step-6 ./configure > > I got following messages > ********************************************************************* > The following components were skipped either because you asked not > to build them or they didn't pass configuration checks: > > usrp2-firmware > > These components will not be built. > > > ********************************************************************* > The following GNU Radio components have been successfully configured: > > config > gruel > volk > gnuradio-core > usrp > usrp2 > gr-usrp > gr-usrp2 > gr-msdd6000 > gr-audio > gr-atsc > gr-cvsd-vocoder > gr-gpio > gr-gsm-fr-vocoder > gr-noaa > gr-pager > gr-radar-mono > gr-radio-astronomy > gr-trellis > gr-video-sdl > gr-wxgui > gr-qtgui > gr-sounder > gr-utils > gnuradio-examples > grc > docs > > You my now run the make command to build these components. > > ********************************************************************* > The following components were skipped either because you asked not > to build them or they didn't pass configuration checks: > > gcell > gr-gcell > gr-comedi > gr-uhd > > These components will not be built. > > Configured GNU Radio release v3.4.0-2-g081497e7 for build. > > ********************************************************************** > > I searched a lot and found answer to many of questions > > From the following link(in the summary) i found that no need to build > gr-comedi > http://lists.gnu.org/archive/html/discuss-gnuradio/2006-06/msg00225.html > > Also in the following link I read that gcell and gr-gcell are needed only > for IBM cell processor. > http://www.ruby-forum.com/topic/201112 > > So I want to ask what should I do to build > > gr-uhd and usrp2-firmware > > I also did > > ./configure --enable-gr-uhd > > but it shows following message > > checking for UHD... no > gr-uhd requires libuhd 3.x.x > configure: error: Component gr-uhd has errors; stopping. > > I also did > > ./configure --enable-usrp2-firmware > > and got following message > > checking whether byte ordering is bigendian... no > checking for mb-gcc... no > usrp2 firmware requires mb-gcc. Not found > configure: error: Component usrp2-firmware has errors; stopping. > configure: error: ./configure.gnu failed for usrp2/firmware > > I saw several posts with the same problem but honestly I couldn't understand > what to do next. > > Regards > > > > > ----- > Sumit Kr. > Research Assistant > Communication Research center > IIIT Hyderabad > India > -- > View this message in context: > http://old.nabble.com/Reg-%3A-Building-gr-uhd-and-usrp2-firmware-tp31915462p31915462.html > Sent from the GnuRadio mailing list archive at Nabble.com. > > > _______________________________________________ > Discuss-gnuradio mailing list > Discuss-gnuradio@gnu.org > https://lists.gnu.org/mailman/listinfo/discuss-gnuradio > _______________________________________________ Discuss-gnuradio mailing list Discuss-gnuradio@gnu.org https://lists.gnu.org/mailman/listinfo/discuss-gnuradio
