Hi Morgan...actually I din't installed UHD before gnuradio.Now when I installed UHD ,my problem seems to be solved now :) gr-uhd is built now. Thanks
Morgan Redfield-2 wrote: > > Did you install UHD before you built gnuradio? > > You can follow the build guide here: > http://www.ettus.com/uhd_docs/manual/html/build.html > > Morgan > > On Thu, Jun 23, 2011 at 3:50 PM, sumitstop > <sumit.ku...@research.iiit.ac.in> wrote: >> >> I am using ubuntu Lucid 10.04 LTS. >> >> Did the following thing >> >> Step-1 Installed all the dependencies for ubuntu Lucid 10.04 from the >> script >> given here >> http://gnuradio.org/redmine/projects/gnuradio/wiki/UbuntuInstall >> >> step-2 git clone http://gnuradio.org/git/gnuradio.git >> then >> >> step-3 git clone http://github.com/EttusResearch/UHD-Mirror.git >> after that >> >> step-4 cd gnuradio >> step-5 ./bootstrap >> step-6 ./configure >> >> I got following messages >> ********************************************************************* >> The following components were skipped either because you asked not >> to build them or they didn't pass configuration checks: >> >> usrp2-firmware >> >> These components will not be built. >> >> >> ********************************************************************* >> The following GNU Radio components have been successfully configured: >> >> config >> gruel >> volk >> gnuradio-core >> usrp >> usrp2 >> gr-usrp >> gr-usrp2 >> gr-msdd6000 >> gr-audio >> gr-atsc >> gr-cvsd-vocoder >> gr-gpio >> gr-gsm-fr-vocoder >> gr-noaa >> gr-pager >> gr-radar-mono >> gr-radio-astronomy >> gr-trellis >> gr-video-sdl >> gr-wxgui >> gr-qtgui >> gr-sounder >> gr-utils >> gnuradio-examples >> grc >> docs >> >> You my now run the make command to build these components. >> >> ********************************************************************* >> The following components were skipped either because you asked not >> to build them or they didn't pass configuration checks: >> >> gcell >> gr-gcell >> gr-comedi >> gr-uhd >> >> These components will not be built. >> >> Configured GNU Radio release v3.4.0-2-g081497e7 for build. >> >> ********************************************************************** >> >> I searched a lot and found answer to many of questions >> >> From the following link(in the summary) i found that no need to build >> gr-comedi >> http://lists.gnu.org/archive/html/discuss-gnuradio/2006-06/msg00225.html >> >> Also in the following link I read that gcell and gr-gcell are needed only >> for IBM cell processor. >> http://www.ruby-forum.com/topic/201112 >> >> So I want to ask what should I do to build >> >> gr-uhd and usrp2-firmware >> >> I also did >> >> ./configure --enable-gr-uhd >> >> but it shows following message >> >> checking for UHD... no >> gr-uhd requires libuhd 3.x.x >> configure: error: Component gr-uhd has errors; stopping. >> >> I also did >> >> ./configure --enable-usrp2-firmware >> >> and got following message >> >> checking whether byte ordering is bigendian... no >> checking for mb-gcc... no >> usrp2 firmware requires mb-gcc. Not found >> configure: error: Component usrp2-firmware has errors; stopping. >> configure: error: ./configure.gnu failed for usrp2/firmware >> >> I saw several posts with the same problem but honestly I couldn't >> understand >> what to do next. >> >> Regards >> >> >> >> >> ----- >> Sumit Kr. >> Research Assistant >> Communication Research center >> IIIT Hyderabad >> India >> -- >> View this message in context: >> http://old.nabble.com/Reg-%3A-Building-gr-uhd-and-usrp2-firmware-tp31915462p31915462.html >> Sent from the GnuRadio mailing list archive at Nabble.com. >> >> >> _______________________________________________ >> Discuss-gnuradio mailing list >> Discuss-gnuradio@gnu.org >> https://lists.gnu.org/mailman/listinfo/discuss-gnuradio >> > > _______________________________________________ > Discuss-gnuradio mailing list > Discuss-gnuradio@gnu.org > https://lists.gnu.org/mailman/listinfo/discuss-gnuradio > > ----- Sumit Kr. Research Assistant Communication Research center IIIT Hyderabad India -- View this message in context: http://old.nabble.com/Reg-%3A-Building-gr-uhd-and-usrp2-firmware-tp31915462p31917580.html Sent from the GnuRadio mailing list archive at Nabble.com. _______________________________________________ Discuss-gnuradio mailing list Discuss-gnuradio@gnu.org https://lists.gnu.org/mailman/listinfo/discuss-gnuradio
