This patch adds dump lacp info in eth_dev_priv_dump ops.
The extra dump output is similar to testpmd command
"show bonding lacp info [port]".
Signed-off-by: Chengwen Feng <fengcheng...@huawei.com>
---
drivers/net/bonding/rte_eth_bond_pmd.c | 143 ++++++++++++++++++++++++-
1 file changed, 141 insertions(+), 2 deletions(-)
diff --git a/drivers/net/bonding/rte_eth_bond_pmd.c
b/drivers/net/bonding/rte_eth_bond_pmd.c
index a366900ffa..e0364ef015 100644
--- a/drivers/net/bonding/rte_eth_bond_pmd.c
+++ b/drivers/net/bonding/rte_eth_bond_pmd.c
@@ -3352,8 +3352,8 @@ bond_mode_name(uint8_t mode)
}
}
-static int
-bond_ethdev_priv_dump(struct rte_eth_dev *dev, FILE *f)
+static void
+dump_basic(const struct rte_eth_dev *dev, FILE *f)
{
struct bond_dev_private instant_priv;
const struct bond_dev_private *internals = &instant_priv;
@@ -3427,6 +3427,145 @@ bond_ethdev_priv_dump(struct rte_eth_dev *dev, FILE *f)
fprintf(f, "\tUser Defined Primary: [%u]\n",
internals->primary_port);
if (internals->slave_count > 0)
fprintf(f, "\tCurrent Primary: [%u]\n",
internals->current_primary_port);
+}
+
+static void
+dump_lacp_conf(const struct rte_eth_bond_8023ad_conf *conf, FILE *f)
+{
+ fprintf(f, "\tfast period: %u ms\n", conf->fast_periodic_ms);
+ fprintf(f, "\tslow period: %u ms\n", conf->slow_periodic_ms);
+ fprintf(f, "\tshort timeout: %u ms\n", conf->short_timeout_ms);
+ fprintf(f, "\tlong timeout: %u ms\n", conf->long_timeout_ms);
+ fprintf(f, "\taggregate wait timeout: %u ms\n",
+ conf->aggregate_wait_timeout_ms);
+ fprintf(f, "\ttx period: %u ms\n", conf->tx_period_ms);
+ fprintf(f, "\trx marker period: %u ms\n", conf->rx_marker_period_ms);
+ fprintf(f, "\tupdate timeout: %u ms\n", conf->update_timeout_ms);
+ switch (conf->agg_selection) {
+ case AGG_BANDWIDTH:
+ fprintf(f, "\taggregation mode: bandwidth\n");
+ break;
+ case AGG_STABLE:
+ fprintf(f, "\taggregation mode: stable\n");
+ break;
+ case AGG_COUNT:
+ fprintf(f, "\taggregation mode: count\n");
+ break;
+ default:
+ fprintf(f, "\taggregation mode: invalid\n");
+ break;
+ }
+ fprintf(f, "\n");
+}
+
+static void
+dump_lacp_port_param(const struct port_params *params, FILE *f)
+{
+ char buf[RTE_ETHER_ADDR_FMT_SIZE];
+ fprintf(f, "\t\tsystem priority: %u\n", params->system_priority);
+ rte_ether_format_addr(buf, RTE_ETHER_ADDR_FMT_SIZE, ¶ms->system);
+ fprintf(f, "\t\tsystem mac address: %s\n", buf);
+ fprintf(f, "\t\tport key: %u\n", params->key);
+ fprintf(f, "\t\tport priority: %u\n", params->port_priority);
+ fprintf(f, "\t\tport number: %u\n", params->port_number);
+}
+
+static void
+dump_lacp_slave(const struct rte_eth_bond_8023ad_slave_info *info, FILE *f)
+{
+ char a_state[256] = { 0 };
+ char p_state[256] = { 0 };
+ int a_len = 0;
+ int p_len = 0;
+ uint32_t i;
+
+ static const char * const state[] = {
+ "ACTIVE",
+ "TIMEOUT",
+ "AGGREGATION",
+ "SYNCHRONIZATION",
+ "COLLECTING",
+ "DISTRIBUTING",
+ "DEFAULTED",
+ "EXPIRED"
+ };
+ static const char * const selection[] = {
+ "UNSELECTED",
+ "STANDBY",
+ "SELECTED"
+ };
+
+ for (i = 0; i < RTE_DIM(state); i++) {
+ if ((info->actor_state >> i) & 1)
+ a_len += snprintf(&a_state[a_len],
+ RTE_DIM(a_state) - a_len, "%s ",
+ state[i]);
+
+ if ((info->partner_state >> i) & 1)
+ p_len += snprintf(&p_state[p_len],
+ RTE_DIM(p_state) - p_len, "%s ",
+ state[i]);
+ }
+ fprintf(f, "\tAggregator port id: %u\n", info->agg_port_id);
+ fprintf(f, "\tselection: %s\n", selection[info->selected]);
+ fprintf(f, "\tActor detail info:\n");
+ dump_lacp_port_param(&info->actor, f);
+ fprintf(f, "\t\tport state: %s\n", a_state);
+ fprintf(f, "\tPartner detail info:\n");
+ dump_lacp_port_param(&info->partner, f);
+ fprintf(f, "\t\tport state: %s\n", p_state);
+ fprintf(f, "\n");
+}
+
+static void
+dump_lacp(uint16_t port_id, FILE *f)
+{
+ struct rte_eth_bond_8023ad_slave_info slave_info;
+ struct rte_eth_bond_8023ad_conf port_conf;
+ uint16_t slaves[RTE_MAX_ETHPORTS];
+ int num_active_slaves;
+ int i, ret;
+
+ fprintf(f, " - Lacp info:\n");
+
+ num_active_slaves = rte_eth_bond_active_slaves_get(port_id, slaves,
+ RTE_MAX_ETHPORTS);
+ if (num_active_slaves < 0) {
+ fprintf(f, "\tFailed to get active slave list for port %u\n",
+ port_id);
+ return;
+ }
+
+ fprintf(f, "\tIEEE802.3 port: %u\n", port_id);
+ ret = rte_eth_bond_8023ad_conf_get(port_id, &port_conf);
+ if (ret) {
+ fprintf(f, "\tGet bonded device %u 8023ad config failed\n",
+ port_id);
+ return;
+ }
+ dump_lacp_conf(&port_conf, f);
+
+ for (i = 0; i < num_active_slaves; i++) {
+ ret = rte_eth_bond_8023ad_slave_info(port_id, slaves[i],
+ &slave_info);
+ if (ret) {
+ fprintf(f, "\tGet slave device %u 8023ad info failed\n",
+ slaves[i]);
+ return;
+ }
+ fprintf(f, "\tSlave Port: %u\n", slaves[i]);
+ dump_lacp_slave(&slave_info, f);
+ }
+}
+
+static int
+bond_ethdev_priv_dump(struct rte_eth_dev *dev, FILE *f)
+{
+ const struct bond_dev_private *internals = dev->data->dev_private;
+
+ dump_basic(dev, f);
+ if (internals->mode == BONDING_MODE_8023AD)
+ dump_lacp(dev->data->port_id, f);
return 0;
}
--
2.17.1
