This patch implements eth_dev_priv_dump ops which could enhance the
debug capability.
The dump output is similar to testpmd command
"show bonding config [port]".
Signed-off-by: Chengwen Feng <fengcheng...@huawei.com>
---
drivers/net/bonding/rte_eth_bond_pmd.c | 103 ++++++++++++++++++++++++-
1 file changed, 102 insertions(+), 1 deletion(-)
diff --git a/drivers/net/bonding/rte_eth_bond_pmd.c
b/drivers/net/bonding/rte_eth_bond_pmd.c
index b9bcebc6cb..80fb2dc462 100644
--- a/drivers/net/bonding/rte_eth_bond_pmd.c
+++ b/drivers/net/bonding/rte_eth_bond_pmd.c
@@ -3329,6 +3329,106 @@ bond_ethdev_mac_addr_remove(struct rte_eth_dev *dev,
uint32_t index)
rte_spinlock_unlock(&internals->lock);
}
+static const char *
+bond_mode_name(uint8_t mode)
+{
+ switch (mode) {
+ case BONDING_MODE_ROUND_ROBIN:
+ return "ROUND_ROBIN";
+ case BONDING_MODE_ACTIVE_BACKUP:
+ return "ACTIVE_BACKUP";
+ case BONDING_MODE_BALANCE:
+ return "BALANCE";
+ case BONDING_MODE_BROADCAST:
+ return "BROADCAST";
+ case BONDING_MODE_8023AD:
+ return "8023AD";
+ case BONDING_MODE_TLB:
+ return "TLB";
+ case BONDING_MODE_ALB:
+ return "ALB";
+ default:
+ return "Unknown";
+ }
+}
+
+static int
+bond_ethdev_priv_dump(struct rte_eth_dev *dev, FILE *f)
+{
+ struct bond_dev_private instant_priv;
+ const struct bond_dev_private *internals = &instant_priv;
+ int bonding_mode;
+ int i;
+
+ /* Obtain a instance of dev_private to prevent data from being
modified. */
+ memcpy(&instant_priv, dev->data->dev_private, sizeof(struct
bond_dev_private));
+ bonding_mode = internals->mode;
+
+ fprintf(f, " - Dev basic:\n");
+ fprintf(f, "\tBonding mode: %s(%d)\n", bond_mode_name(bonding_mode),
bonding_mode);
+
+ if (bonding_mode == BONDING_MODE_BALANCE ||
+ bonding_mode == BONDING_MODE_8023AD) {
+ fprintf(f, "\tBalance Xmit Policy: ");
+ switch (internals->balance_xmit_policy) {
+ case BALANCE_XMIT_POLICY_LAYER2:
+ fprintf(f, "BALANCE_XMIT_POLICY_LAYER2");
+ break;
+ case BALANCE_XMIT_POLICY_LAYER23:
+ fprintf(f, "BALANCE_XMIT_POLICY_LAYER23");
+ break;
+ case BALANCE_XMIT_POLICY_LAYER34:
+ fprintf(f, "BALANCE_XMIT_POLICY_LAYER34");
+ break;
+ }
+ fprintf(f, "\n");
+ }
+
+ if (bonding_mode == BONDING_MODE_8023AD) {
+ fprintf(f, "\tIEEE802.3AD Aggregator Mode: ");
+ switch (internals->mode4.agg_selection) {
+ case AGG_BANDWIDTH:
+ fprintf(f, "bandwidth");
+ break;
+ case AGG_STABLE:
+ fprintf(f, "stable");
+ break;
+ case AGG_COUNT:
+ fprintf(f, "count");
+ break;
+ }
+ fprintf(f, "\n");
+ }
+
+ if (internals->slave_count > 0) {
+ fprintf(f, "\tSlaves (%u): [", internals->slave_count);
+ for (i = 0; i < internals->slave_count - 1; i++)
+ fprintf(f, "%u ", internals->slaves[i].port_id);
+
+ fprintf(f, "%u]\n", internals->slaves[internals->slave_count -
1].port_id);
+ } else {
+ fprintf(f, "\tSlaves: []\n");
+ }
+
+ if (internals->active_slave_count > 0) {
+ fprintf(f, "\tActive Slaves (%u): [",
internals->active_slave_count);
+ for (i = 0; i < internals->active_slave_count - 1; i++)
+ fprintf(f, "%u ", internals->active_slaves[i]);
+
+ fprintf(f, "%u]\n",
internals->active_slaves[internals->active_slave_count - 1]);
+
+ } else {
+ fprintf(f, "\tActive Slaves: []\n");
+ }
+
+ if (internals->user_defined_primary_port)
+ fprintf(f, "\tUser Defined Primary: [%u]\n",
internals->primary_port);
+ if (internals->slave_count > 0)
+ fprintf(f, "\tCurrent Primary: [%u]\n",
internals->current_primary_port);
+
+ return 0;
+}
+
const struct eth_dev_ops default_dev_ops = {
.dev_start = bond_ethdev_start,
.dev_stop = bond_ethdev_stop,
@@ -3355,7 +3455,8 @@ const struct eth_dev_ops default_dev_ops = {
.mac_addr_set = bond_ethdev_mac_address_set,
.mac_addr_add = bond_ethdev_mac_addr_add,
.mac_addr_remove = bond_ethdev_mac_addr_remove,
- .flow_ops_get = bond_flow_ops_get
+ .flow_ops_get = bond_flow_ops_get,
+ .eth_dev_priv_dump = bond_ethdev_priv_dump
};
static int
--
2.17.1
