> -----Original Message-----
> From: Jeff Daly <je...@silicom-usa.com>
> Sent: Thursday, April 14, 2022 18:41
> To: Wang, Haiyue <haiyue.w...@intel.com>; dev@dpdk.org
> Cc: sta...@dpdk.org
> Subject: RE: [PATCH v6 2/2] net/ixgbe: Fix SFP detection and linking on
> hotplug
>
>
>
> > -----Original Message-----
> > From: Wang, Haiyue <haiyue.w...@intel.com>
> > Sent: Wednesday, April 13, 2022 11:00 PM
> > To: Jeff Daly <je...@silicom-usa.com>; dev@dpdk.org
> > Cc: sta...@dpdk.org; Stephen Douthit <steph...@silicom-usa.com>
> > Subject: RE: [PATCH v6 2/2] net/ixgbe: Fix SFP detection and linking on
> > hotplug
> >
> > Caution: This is an external email. Please take care when clicking links or
> > opening attachments.
> >
> >
> > > -----Original Message-----
> > > From: Wang, Haiyue
> > > Sent: Thursday, April 14, 2022 10:49
> > > To: Jeff Daly <je...@silicom-usa.com>; dev@dpdk.org
> > > Cc: sta...@dpdk.org; Stephen Douthit <steph...@silicom-usa.com>
> > > Subject: RE: [PATCH v6 2/2] net/ixgbe: Fix SFP detection and linking
> > > on hotplug
> > >
> > > > -----Original Message-----
> > > > From: Jeff Daly <je...@silicom-usa.com>
> > > > Sent: Wednesday, April 13, 2022 01:42
> > > > To: dev@dpdk.org
> > > > Cc: sta...@dpdk.org; Stephen Douthit <steph...@silicom-usa.com>;
> > > > Wang, Haiyue <haiyue.w...@intel.com>
> > > > Subject: [PATCH v6 2/2] net/ixgbe: Fix SFP detection and linking on
> > > > hotplug
> > > >
> > > > Currently the ixgbe driver does not ID any SFP except for the first
> > > > one plugged in. This can lead to no-link, or incorrect speed conditions.
> > > >
> > > > For example:
> > > >
> > > > * If link is initially established with a 1G SFP, and later a 1G/10G
> > > > multispeed part is later installed, then the MAC link setup
> > > > functions are never called to change from 1000BASE-X to 10GBASE-R
> > > > mode, and the link stays running at the slower rate.
> > > >
> > > > * If link is initially established with a 1G SFP, and later a 10G
> > > > only module is later installed, no link is established, since we are
> > > > still trasnsmitting in 1000BASE-X mode to a 10GBASE-R only partner.
> > > >
> > > > Refactor the SFP ID/setup, and link setup code, to more closely
> > > > match the flow of the mainline kernel driver which does not have
> > > > these issues. In that driver a service task runs periodically to
> > > > handle these operations based on bit flags that have been set
> > > > (usually via interrupt or userspace request), and then get cleared
> > > > once the requested subtask has been completed.
> > > >
> > > > Fixes: af75078fece ("first public release")
> > > > Cc: sta...@dpdk.org
> > > >
> > > > Signed-off-by: Stephen Douthit <steph...@silicom-usa.com>
> > > > Signed-off-by: Jeff Daly <je...@silicom-usa.com>
> > > > ---
> > > > drivers/net/ixgbe/ixgbe_ethdev.c | 533
> > > > +++++++++++++++++++++++-------- drivers/net/ixgbe/ixgbe_ethdev.h |
> > > > 14 +-
> > > > 2 files changed, 410 insertions(+), 137 deletions(-)
> > > >
> > >
> > >
> > > >
> > > > struct ixgbe_stat_mapping_registers { @@ -510,7 +509,7 @@ struct
> > > > ixgbe_adapter {
> > > > uint8_t pflink_fullchk;
> > > > uint8_t mac_ctrl_frame_fwd;
> > > > rte_atomic32_t link_thread_running;
> > > > - pthread_t link_thread_tid;
> > > > + pthread_t service_thread_tid;
> > >
> > > No need to rename this variable,
> >
> > Let's do link related service now, so we can keep it, I missed to add my
> > comment. ;-)
> >
>
> I don't understand this reply, are you still asking to rework the patch or
> not?
>
Different thing.
1. This var can be kept to trace the created thread. (change less code to keep
the patch clean.)
2. Yes, two patches.
> > > we can separate this patch as least into two patches:
> >
> >
> > >
> > > 1st, change the thread handle 'ixgbe_dev_setup_link_thread_handler'
> > > from
> > >
> > > run-once to as periodical, to handle the original issue.
> > >
> > > The name 'ixgbe_dev_setup_link_thread_handler' may be not suitable
> > > now, as it is a service thread.
> > >
> > > We can change it to "'ixgbe_link_service_thread_handler'" to reflect
> > > the change purpose.
> > >
> > > 2nd, add the SFP hotplug in this patch.
> > >
> > >
> > >
> > > > };
> > > >
> > > > --
> > > > 2.25.1
