> From: Wang, Haiyue [mailto:haiyue.w...@intel.com] > Sent: Wednesday, 13 April 2022 09.02 > > > From: Morten Brørup <m...@smartsharesystems.com> > > Sent: Wednesday, April 13, 2022 14:58 > > > > > From: Wang, Haiyue [mailto:haiyue.w...@intel.com] > > > Sent: Wednesday, 13 April 2022 04.47 > > > To: Daly, Jeff; dev@dpdk.org > > > Cc: sta...@dpdk.org; Stephen Douthit; Yang, Qiming > > > > > > > From: Jeff Daly <je...@silicom-usa.com> > > > > Sent: Wednesday, April 13, 2022 01:42 > > > > To: dev@dpdk.org > > > > Cc: sta...@dpdk.org; Stephen Douthit <steph...@silicom-usa.com>; > > > Wang, Haiyue <haiyue.w...@intel.com> > > > > > > > > Currently the ixgbe driver does not ID any SFP except for the > first > > > one > > > > plugged in. This can lead to no-link, or incorrect speed > conditions. > > > > > > > > For example: > > > > > > > > * If link is initially established with a 1G SFP, and later a > 1G/10G > > > > multispeed part is later installed, then the MAC link setup > functions > > > are > > > > never called to change from 1000BASE-X to 10GBASE-R mode, and the > > > link > > > > stays running at the slower rate. > > > > > > > > * If link is initially established with a 1G SFP, and later a 10G > > > only > > > > module is later installed, no link is established, since we are > still > > > > trasnsmitting in 1000BASE-X mode to a 10GBASE-R only partner. > > > > > > > > Refactor the SFP ID/setup, and link setup code, to more closely > match > > > the > > > > flow of the mainline kernel driver which does not have these > issues. > > > In > > > > that driver a service task runs periodically to handle these > > > operations > > > > based on bit flags that have been set (usually via interrupt or > > > userspace > > > > request), and then get cleared once the requested subtask has > been > > > > completed. > > > > > > > > Fixes: af75078fece ("first public release") > > > > Cc: sta...@dpdk.org > > > > > > > > > > So BIG change for new platform, DON'T CC to stable! > > > > What do you mean by "new platform"? The ixgbe hardware and driver is > not new. > > > > It's soc NIC, ixgbe not support before.
If the patch only fixes the driver for a new NIC that not supported by older DPDK versions, and that NIC is not going to be supported by older DPDK versions, then I agree that there is no point in backporting it or CC'ing stable. However, if the patch could also apply to any other ixgbe NIC that is potentially supported by older DPDK versions, then it should be backported. > > > This patch fixes a bug (with a serious impact when occurring), so it > should be backported. The size of > > the patch does not disqualify it for backporting. > > > > -Morten >
