> -----Original Message-----
> From: Wang, Haiyue
> Sent: Thursday, April 14, 2022 10:49
> To: Jeff Daly <je...@silicom-usa.com>; dev@dpdk.org
> Cc: sta...@dpdk.org; Stephen Douthit <steph...@silicom-usa.com>
> Subject: RE: [PATCH v6 2/2] net/ixgbe: Fix SFP detection and linking on
> hotplug
>
> > -----Original Message-----
> > From: Jeff Daly <je...@silicom-usa.com>
> > Sent: Wednesday, April 13, 2022 01:42
> > To: dev@dpdk.org
> > Cc: sta...@dpdk.org; Stephen Douthit <steph...@silicom-usa.com>; Wang,
> > Haiyue <haiyue.w...@intel.com>
> > Subject: [PATCH v6 2/2] net/ixgbe: Fix SFP detection and linking on hotplug
> >
> > Currently the ixgbe driver does not ID any SFP except for the first one
> > plugged in. This can lead to no-link, or incorrect speed conditions.
> >
> > For example:
> >
> > * If link is initially established with a 1G SFP, and later a 1G/10G
> > multispeed part is later installed, then the MAC link setup functions are
> > never called to change from 1000BASE-X to 10GBASE-R mode, and the link
> > stays running at the slower rate.
> >
> > * If link is initially established with a 1G SFP, and later a 10G only
> > module is later installed, no link is established, since we are still
> > trasnsmitting in 1000BASE-X mode to a 10GBASE-R only partner.
> >
> > Refactor the SFP ID/setup, and link setup code, to more closely match the
> > flow of the mainline kernel driver which does not have these issues. In
> > that driver a service task runs periodically to handle these operations
> > based on bit flags that have been set (usually via interrupt or userspace
> > request), and then get cleared once the requested subtask has been
> > completed.
> >
> > Fixes: af75078fece ("first public release")
> > Cc: sta...@dpdk.org
> >
> > Signed-off-by: Stephen Douthit <steph...@silicom-usa.com>
> > Signed-off-by: Jeff Daly <je...@silicom-usa.com>
> > ---
> > drivers/net/ixgbe/ixgbe_ethdev.c | 533 +++++++++++++++++++++++--------
> > drivers/net/ixgbe/ixgbe_ethdev.h | 14 +-
> > 2 files changed, 410 insertions(+), 137 deletions(-)
> >
>
>
> >
> > struct ixgbe_stat_mapping_registers {
> > @@ -510,7 +509,7 @@ struct ixgbe_adapter {
> > uint8_t pflink_fullchk;
> > uint8_t mac_ctrl_frame_fwd;
> > rte_atomic32_t link_thread_running;
> > - pthread_t link_thread_tid;
> > + pthread_t service_thread_tid;
>
> No need to rename this variable,
Let's do link related service now, so we can keep it, I missed to add my
comment. ;-)
> we can separate this patch as least into
> two patches:
>
> 1st, change the thread handle 'ixgbe_dev_setup_link_thread_handler' from
>
> run-once to as periodical, to handle the original issue.
>
> The name 'ixgbe_dev_setup_link_thread_handler' may be not suitable now,
> as it is a service thread.
>
> We can change it to "'ixgbe_link_service_thread_handler'" to reflect the
> change purpose.
>
> 2nd, add the SFP hotplug in this patch.
>
>
>
> > };
> >
> > --
> > 2.25.1
