On Wed, 2004-06-09 at 17:09, William Ballard wrote: > >From this snippet of XFree86.0.log, can anyone construct a modeline > which will come up at [EMAIL PROTECTED] The monitor is NEC LCD1850E with a > Radeon 9800XT. > > (II) fglrx(0): Supported additional Video Mode: > (II) fglrx(0): clock: 135.0 MHz Image Size: 359 x 287 mm > (II) fglrx(0): h_active: 1280 h_sync: 1296 h_sync_end 1440 h_blank_end > 1688 h_border: 0 > (II) fglrx(0): v_active: 1024 v_sync: 1025 v_sync_end 1028 v_blanking: > 1066 v_border: 0 > (II) fglrx(0): Ranges: V min: 55 V max: 85 Hz, H min: 31 H max: 82 > kHz, PixClock max 140 MHz
Well, if the same technique works as did for me: Modeline "1280x1024" 135 1280 1296 1440 1688 1024 1025 1028 1066 Which actually looks the same as a line further down in the log: > (II) fglrx(0): Monitor name: NEC LCD1850E > (II) fglrx(0): Serial No: 204011324 > (II) fglrx(0): > (II) fglrx(0): DesktopSetup 0x0000 > (**) fglrx(0): PseudoColor visuals disabled > (**) fglrx(0): Overlay disabled > (**) fglrx(0): Overlay disabled > (II) fglrx(0): PLL parameters: rf=2700 rd=12 min=20000 max=40000; > xclk=36500 > (==) fglrx(0): Using gamma correction (1.0, 1.0, 1.0) > (**) fglrx(0): Center Mode is disabled > (==) fglrx(0): TMDS coherent mode is enabled > (II) fglrx(0): Total 5 valid mode(s) found. > (--) fglrx(0): Virtual size is 1280x1024 (pitch 1280) > (**) fglrx(0): *Default mode "1280x1024": 135.0 MHz (scaled from 0.0 > MHz), 80.0 kHz, 75.0 Hz > (II) fglrx(0): Modeline "1280x1024" 135.00 1280 1296 1440 1688 1024 > 1025 1028 1066 ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ If it doesn't work, we'll have to find someone more knowledgeable than us. Let us know how you go. good luck zen -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
