On Wed, 2004-06-09 at 15:30, Zenaan Harkness wrote: > Just as a refresher, these bits, as I posted previously, of my > XFree logs, stand out rather strongly to me, suggesting there > might be a way to get 1600x1200...: > > (II) RADEON(0): Supported Future Video Modes: > (II) RADEON(0): #0: hsize: 640 vsize 480 refresh: 85 vid: 22833 > (II) RADEON(0): #1: hsize: 800 vsize 600 refresh: 85 vid: 22853 > (II) RADEON(0): #2: hsize: 1024 vsize 768 refresh: 85 vid: 22881 > (II) RADEON(0): #3: hsize: 1152 vsize 864 refresh: 75 vid: 20337 > (II) RADEON(0): #4: hsize: 1280 vsize 960 refresh: 75 vid: 20353 > (II) RADEON(0): #5: hsize: 1280 vsize 1024 refresh: 60 vid: 32897 > (II) RADEON(0): #6: hsize: 1280 vsize 1024 refresh: 85 vid: 39297 > (II) RADEON(0): #7: hsize: 1600 vsize 1200 refresh: 60 vid: 16553 > (II) RADEON(0): Supported additional Video Mode: > ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ > (II) RADEON(0): clock: 162.0 MHz Image Size: 408 x 306 mm > (II) RADEON(0): h_active: 1600 h_sync: 1664 h_sync_end 1856 > h_blank_end 2160 h_border: 0 > ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ > > (II) RADEON(0): v_active: 1200 v_sync: 1201 v_sync_end 1204 > v_blanking: 1250 v_border: 0 > ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ > > (II) RADEON(0): Ranges: V min: 48 V max: 87 Hz, H min: 30 H max: 96 > kHz, PixClock max 170 MHz > (II) RADEON(0): Monitor name: LCD2080UX+ > (II) RADEON(0): Serial No: 44106076YB > (II) RADEON(0): End of Monitor2 EDID data -------------------- > > ------------------------------ > If anyone knows if its possible to turn the above numbers into > something sensible that will get XFree86 to drive my LCD, that > just might do the trick...
I tried manually using the above numbers to create a modeline, and this works. Here's what I just tried, and is now in my "Monitor" config sections for the external LCD: Modeline "1600x1200" 162 1600 1664 1856 2160 1200 1201 1204 1250 I am home sweet home, thanks to all, especially Alvin. For those who have a similar problem (eg. perhaps with Viewsonic VX2000, VP2290b (3840x2400:)), VP230mb, VP201B or VP211b, the Samsung 213T, Mitsubishi DV201B, or BENQ FP2081 or 2091 (all 21"+ LCDs that can do 1600x1200): - run XFree86 -configure, and then run with the generated file - check the logs to find out the "Supported Additional Video Mode" - munge the horizontal and vertical sync values into a modeline, which should be similar to the one I've created above. good luck, and thanks again zen -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
