Why are these modes of my LCD only "future" supported, according to XFree86.0.log?:
(II) RADEON(0): Supported Future Video Modes: (II) RADEON(0): #0: hsize: 640 vsize 480 refresh: 85 vid: 22833 (II) RADEON(0): #1: hsize: 800 vsize 600 refresh: 85 vid: 22853 (II) RADEON(0): #2: hsize: 1024 vsize 768 refresh: 85 vid: 22881 (II) RADEON(0): #3: hsize: 1152 vsize 864 refresh: 75 vid: 20337 (II) RADEON(0): #4: hsize: 1280 vsize 960 refresh: 75 vid: 20353 (II) RADEON(0): #5: hsize: 1280 vsize 1024 refresh: 60 vid: 32897 (II) RADEON(0): #6: hsize: 1280 vsize 1024 refresh: 85 vid: 39297 (II) RADEON(0): #7: hsize: 1600 vsize 1200 refresh: 60 vid: 16553 (II) RADEON(0): Supported additional Video Mode: (II) RADEON(0): clock: 162.0 MHz Image Size: 408 x 306 mm (II) RADEON(0): h_active: 1600 h_sync: 1664 h_sync_end 1856 h_blank_end 2160 h_border: 0 (II) RADEON(0): v_active: 1200 v_sync: 1201 v_sync_end 1204 v_blanking: 1250 v_border: 0 (II) RADEON(0): Ranges: V min: 48 V max: 87 Hz, H min: 30 H max: 96 kHz, PixClock max 170 MHz (II) RADEON(0): Monitor name: LCD2080UX+ (II) RADEON(0): Serial No: 44106076YB (II) RADEON(0): End of Monitor2 EDID data -------------------- My real question: how do I get 1600x1200 (the native resolution) out of this thing? Anyone reading my previous X posts will note that I have Xinerama working on my laptop with Radeon 7500, in a laptop, with laptop LCD as Screen 0 and this NEC as VGA->DVI-A external Screen 1. The display is fuzzy - as in actively blurry like a CRT scanning at the wrong frequency or something (it's not just out of focus) - at all but 1024x768 (or something near that). According to the NEC manual, specs are: Section "Monitor" Identifier "NEC" DisplaySize 410 310 # mm HorizSync 31.5-91.1 VertRefresh 50-85 VendorName "NEC" ModelName "LCD2080UX+" Option "DPMS" EndSection Thanks in advance Zenaan -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
