For the life of me, I cannot figure out how to make my monitor run at [EMAIL PROTECTED] It always runs at [EMAIL PROTECTED]
>From this snippet of XFree86.0.log, can anyone construct a modeline which will come up at [EMAIL PROTECTED] The monitor is NEC LCD1850E with a Radeon 9800XT. (II) fglrx(0): First detailed timing is preferred mode (II) fglrx(0): redX: 0.633 redY: 0.340 greenX: 0.295 greenY: 0.603 (II) fglrx(0): blueX: 0.141 blueY: 0.096 whiteX: 0.313 whiteY: 0.329 (II) fglrx(0): Supported VESA Video Modes: (II) fglrx(0): [EMAIL PROTECTED] (II) fglrx(0): [EMAIL PROTECTED] (II) fglrx(0): [EMAIL PROTECTED] (II) fglrx(0): [EMAIL PROTECTED] (II) fglrx(0): [EMAIL PROTECTED] (II) fglrx(0): [EMAIL PROTECTED] (II) fglrx(0): [EMAIL PROTECTED] (II) fglrx(0): [EMAIL PROTECTED] (II) fglrx(0): [EMAIL PROTECTED] (II) fglrx(0): [EMAIL PROTECTED] (II) fglrx(0): [EMAIL PROTECTED] (II) fglrx(0): [EMAIL PROTECTED] (II) fglrx(0): [EMAIL PROTECTED] (II) fglrx(0): [EMAIL PROTECTED] (II) fglrx(0): [EMAIL PROTECTED] (II) fglrx(0): Manufacturer's mask: 0 (II) fglrx(0): Supported Future Video Modes: (II) fglrx(0): #0: hsize: 640 vsize 480 refresh: 85 vid: 22833 (II) fglrx(0): #1: hsize: 800 vsize 600 refresh: 85 vid: 22853 (II) fglrx(0): #2: hsize: 1024 vsize 768 refresh: 85 vid: 22881 (II) fglrx(0): Supported additional Video Mode: (II) fglrx(0): clock: 135.0 MHz Image Size: 359 x 287 mm (II) fglrx(0): h_active: 1280 h_sync: 1296 h_sync_end 1440 h_blank_end 1688 h_border: 0 (II) fglrx(0): v_active: 1024 v_sync: 1025 v_sync_end 1028 v_blanking: 1066 v_border: 0 (II) fglrx(0): Ranges: V min: 55 V max: 85 Hz, H min: 31 H max: 82 kHz, PixClock max 140 MHz (II) fglrx(0): Monitor name: NEC LCD1850E (II) fglrx(0): Serial No: 204011324 (II) fglrx(0): (II) fglrx(0): DesktopSetup 0x0000 (**) fglrx(0): PseudoColor visuals disabled (**) fglrx(0): Overlay disabled (**) fglrx(0): Overlay disabled (II) fglrx(0): PLL parameters: rf=2700 rd=12 min=20000 max=40000; xclk=36500 (==) fglrx(0): Using gamma correction (1.0, 1.0, 1.0) (**) fglrx(0): Center Mode is disabled (==) fglrx(0): TMDS coherent mode is enabled (II) fglrx(0): Total 5 valid mode(s) found. (--) fglrx(0): Virtual size is 1280x1024 (pitch 1280) (**) fglrx(0): *Default mode "1280x1024": 135.0 MHz (scaled from 0.0 MHz), 80.0 kHz, 75.0 Hz (II) fglrx(0): Modeline "1280x1024" 135.00 1280 1296 1440 1688 1024 1025 1028 1066 (**) fglrx(0): Default mode "1024x768": 94.5 MHz (scaled from 0.0 MHz), 68.7 kHz, 85.0 Hz (II) fglrx(0): Modeline "1024x768" 94.50 1024 1072 1168 1376 768 769 772 808 +hsync +vsync (**) fglrx(0): Default mode "832x624": 57.3 MHz (scaled from 0.0 MHz), 49.7 kHz, 74.6 Hz (II) fglrx(0): Modeline "832x624" 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (**) fglrx(0): Default mode "800x600": 56.3 MHz (scaled from 0.0 MHz), 53.7 kHz, 85.1 Hz (II) fglrx(0): Modeline "800x600" 56.30 800 832 896 1048 600 601 604 631 +hsync +vsync (**) fglrx(0): Default mode "640x480": 36.0 MHz (scaled from 0.0 MHz), 43.3 kHz, 85.0 Hz (II) fglrx(0): Modeline "640x480" 36.00 640 696 752 832 480 481 484 509 -hsync -vsync (++) fglrx(0): DPI set to (100, 100) (II) Loading sub module "fb" (II) LoadModule: "fb" -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
