Ditto. The square head driver Bill
On Sat, Apr 17, 2021, 4:20 PM John Irvin via CnC-List <cnc-list@cnc-list.com> wrote: > Mine (27-III) werebRobertsons > > Sent from my iPhone > > On Apr 17, 2021, at 2:02 PM, General Gao via CnC-List < > cnc-list@cnc-list.com> wrote: > > > Hi Dwight, do you remember what kind of screw head it was? I tried to look > through the deep small hole, couldn’t see it clearly...tried all kinds of > screwdriver and could not get it to work. > > Bo > > > On Thu, Apr 15, 2021 at 12:48 PM dwight veinot via CnC-List < > cnc-list@cnc-list.com> wrote: > >> I have a 1974 35 MKii. There are 2 additional brass screws in each leg. >> Some will break because they probably have dealloyed. I did this exact job >> about 10 years ago. Still good >> >> On Thu, Apr 15, 2021 at 10:26 AM General Gao via CnC-List < >> cnc-list@cnc-list.com> wrote: >> >>> Thx everyone for chiming in! >>> >>> My apologies I had thought I added my boat model in my signature, mine >>> is a 1974 C&C 35 Mk2. >>> >>> I would agree with you, it would be extremely unlikely that there was no >>> wood screw used; besides, who would put through holes on the cabin if they >>> did not intend to use screws to fasten the handrail from inside? I used >>> flashlight, and I also used screw driver to poke inside the holes, I >>> couldn't find anything. I will try again today. >>> >>> But if anyone had worked on the same model of boat, I'd appreciate some >>> kind of confirmation. >>> >>> Regards, >>> >>> Bo >>> >>> >> > > -- > 1974 C&C 35 MK2 > Thanks to all of the subscribers that contributed to the list to help with > the costs involved. If you want to show your support to the list - use > PayPal to send contribution -- https://www.paypal.me/stumurray Thanks > - Stu > > Thanks to all of the subscribers that contributed to the list to help with > the costs involved. If you want to show your support to the list - use > PayPal to send contribution -- https://www.paypal.me/stumurray Thanks > - Stu
Thanks to all of the subscribers that contributed to the list to help with the costs involved. If you want to show your support to the list - use PayPal to send contribution -- https://www.paypal.me/stumurray Thanks - Stu
