My 1973 30' Mk 1 had a 13hp atomic four but was re-engine 12 years ago with a 20 hp Universal. She stops on a dime and handles very well with all that power. I suspect some might simply have been re-powered over the years as our Santiago was.
________________________________ From: CnC-List <cnc-list-boun...@cnc-list.com> on behalf of Peter Cowenhoven via CnC-List <cnc-list@cnc-list.com> Sent: August 24, 2020 11:17 AM To: cnc-list@cnc-list.com <cnc-list@cnc-list.com> Cc: Peter Cowenhoven <pscowenho...@yahoo.com> Subject: Re: Stus-List 37+ Cruise Speed I've got a Westerbeke 33 with a 2 blade folding prop. I would say I do 7 knots at about 2700 -2800 rpm pretty consistently. Sent from Yahoo Mail on Android<https://go.onelink.me/107872968?pid=InProduct&c=Global_Internal_YGrowth_AndroidEmailSig__AndroidUsers&af_wl=ym&af_sub1=Internal&af_sub2=Global_YGrowth&af_sub3=EmailSignature> On Tue, Jun 23, 2020 at 12:53 PM, Rob Hamlin via CnC-List <cnc-list@cnc-list.com> wrote: Hi What is everyone’s motor/ rpm optimal motoring speed? Thanks Rob Sent from my iPhone _______________________________________________ Thanks everyone for supporting this list with your contributions. Each and every one is greatly appreciated. If you want to support the list - use PayPal to send contribution -- https://www.paypal.me/stumurray
_______________________________________________ Thanks everyone for supporting this list with your contributions. Each and every one is greatly appreciated. If you want to support the list - use PayPal to send contribution -- https://www.paypal.me/stumurray