G10 is great stuff but I make up my own glass sheets. I just lay up a bunch of layers of glass/epoxy or glass/resin on a sheet of waxed paper. -- Dennis C. Touche' 35-1 #83 Mandeville, LA On Sun, Jun 14, 2020 at 10:55 AM Nathan Post via CnC-List < cnc-list@cnc-list.com> wrote:
> G-10 is a common premade pultruded eglass epoxy material also called > garolite or FR4: > > > https://www.mcmaster.com/grade-g-10-garolite/multipurpose-flame-retardant-garolite-g-10-fr4-sheets-and-bars/ > > Very handy for repairs, backing plates that don’t corrode (use 1/4” or > thicker), replacement core material in an area you will drill through, etc. > you can make your own material by laying up glass and epoxy on a plate > coated with release agent but but buying it is easier and it is tightly > dimensioned In thickness. >
_______________________________________________ Thanks everyone for supporting this list with your contributions. Each and every one is greatly appreciated. If you want to support the list - use PayPal to send contribution -- https://www.paypal.me/stumurray
