Rick Am I wrong in assuming you meant you used Brightside on the bulkheads and either Brightside with non skid additive or Interdeck on the non skid areas?
Mike Persistence Halifax From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Rick Brass via CnC-List Sent: Wednesday, May 01, 2019 9:41 PM To: cnc-list@cnc-list.com Cc: Rick Brass Subject: Re: Stus-List painting strategy for deck Interlux vs Pettit Imzadi and Belle are two of the three boats on which I’ve seen the deck painted with Interdeck in the past three years. The first was my friend’s Tartan 37. On the recommendation of the guy who does most of the work on Imzadi and after seeing the Tartan a year after being painted I used it on my 38. After another year I did my 25. I had originally considered doing the deck s with Kiwi Grip. Interdeck is a 1 part paint. About $40 a quart at West Marine. Unlike Petit deck paint you can’t tint Interdeck for color match. The off white looked to be a good match for the faded smoke white, but turned out to be a little brighter white. On Imzadi, the non-skid got painted and the flat parts of the deck, cockpit bulkheads, and house were not painted. After two summer, I don’t notice the difference any more. On Belle, the gelcoat where the house meets the fore deck was pretty warn by 44 years of use. Patches of gelcoat were essentially gone and you could see sunlight through the laminate from the inside, and amber blotches in the deck. We used Interdeck with the Interlux non-skid additive on the non-skid (which is almost everything on a 25) and Interdeck without non-skid on the cockpit bulkhead and vertical surfaces. I was surprised at how easy prep was. Wash good with deck cleaner and a stiff brush. Wash again with Comet and a stiff brush. Rinse thoroughly and let dry. Paint the first coat. Rick Brass Imzadi C&C 38 mk2 #47 la Belle Aurore C&C 25 mk1 #225 Washington, NC From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of CHARLES SCHEAFFER via CnC-List Sent: Wednesday, May 1, 2019 1:53 PM To: CNC boat owners, cnc-list <cnc-list@cnc-list.com> Cc: CHARLES SCHEAFFER <cscheaf...@comcast.net> Subject: Stus-List painting strategy for deck Interlux vs Pettit Hi all, I'm planning paint my boat's deck in stages, roll and tip. I've chosen Kiwi Grip for the non-skid. Ten years ago I tried a two part primer and Interlux Perfection and painted the transom only. I picked a day with too much heat and the sun hit the transom each afternoon so I had to grind/sand that off and recoat. I ended up using Brightside and it looked very professional but is now showing some problems after ten years. I just tried Pettit EZpoxy for the first time on a helm seat. Same price as Interlux but flows out better and easier. The paint went on easy and looks great. The primer, EZ Prime, stinks more than the finish coat, EZ Poxy but the smell goes away once the paint dries. Nothing stinks as much as Bilge Coat which I find smells for days so I'd like to avoid Brightside which is a close cousin. Two part paints are supposed to last longer but they cost more and I want to avoid all the carcinigens and eternal mixing of two part primer, two part finish coat, two part flattener. Any opinions out there, Pettit vs Interlux or some other system? Chuck S, Resolute 1990 C&C 34R
_______________________________________________ Thanks everyone for supporting this list with your contributions. Each and every one is greatly appreciated. If you want to support the list - use PayPal to send contribution -- https://www.paypal.me/stumurray
