Chuck, I'd also look at Epiphanes 2 part. Call Jamestown Distributors.
Joel On Wed, May 1, 2019 at 1:53 PM CHARLES SCHEAFFER via CnC-List < cnc-list@cnc-list.com> wrote: > Hi all, > > > I'm planning paint my boat's deck in stages, roll and tip. I've chosen > Kiwi Grip for the non-skid. Ten years ago I tried a two part primer and > Interlux Perfection and painted the transom only. I picked a day with too > much heat and the sun hit the transom each afternoon so I had to grind/sand > that off and recoat. I ended up using Brightside and it looked very > professional but is now showing some problems after ten years. > > > I just tried Pettit EZpoxy for the first time on a helm seat. Same price > as Interlux but flows out better and easier. The paint went on easy and > looks great. The primer, EZ Prime, stinks more than the finish coat, EZ > Poxy but the smell goes away once the paint dries. Nothing stinks as much > as Bilge Coat which I find smells for days so I'd like to avoid Brightside > which is a close cousin. > > > Two part paints are supposed to last longer but they cost more and I want > to avoid all the carcinigens and eternal mixing of two part primer, two > part finish coat, two part flattener. > > > Any opinions out there, Pettit vs Interlux or some other system? > > > Chuck S, Resolute 1990 C&C 34R > _______________________________________________ > > Thanks everyone for supporting this list with your contributions. Each > and every one is greatly appreciated. If you want to support the list - > use PayPal to send contribution -- https://www.paypal.me/stumurray > > -- Joel 301 541 8551
_______________________________________________ Thanks everyone for supporting this list with your contributions. Each and every one is greatly appreciated. If you want to support the list - use PayPal to send contribution -- https://www.paypal.me/stumurray
