Hi Josh,
I think I may be interested, but will need to get to the boat to do some 
measuring over the weekend.
Will let you know shortly, 
 Bruce Whitmore

(847) 404-5092 (mobile)
bwhitm...@sbcglobal.net


      From: Josh Muckley via CnC-List <cnc-list@cnc-list.com>
 To: C&C List <cnc-list@cnc-list.com> 
Cc: Josh Muckley <muckl...@gmail.com>
 Sent: Friday, June 22, 2018 9:49 AM
 Subject: Re: Stus-List Free Sails for C&C 37+
   
I got a chance to go through the sails that Bacon claimed to be "delaminating" 
and "of no value".  I'm not a professional sail maker (or sailor for that 
matter) but both sails looked to be in perfectly fine condition.  They might be 
equivalent to a 2 or 3 year old race sail.  No delamination anywhere.  As Ron 
described one is a 98% and the other is a 155%.  The 98% has partial battens.  
The 155% is radial cut.  Both are a mylar/kevlar material and very light by 
comparison to my 7.5 oz cloth %145.  The sail bags appear to be in worse 
condition than the sails.  I'll be holding the sails until Ron picks them up in 
October.  If anybody is interested between now and then, just let me or Ron 
know.
Josh MuckleyS/V Sea Hawk1989 C&C 37+Solomons, MD
On Wed, Jun 20, 2018, 12:17 PM Josh Muckley <muckl...@gmail.com> wrote:

For anyone else considering these sails, feel free to reach out to me.  I've 
agree to hold on to them for Ron but will likely never use them.  I have the 
triple spreader rig and have had a new sail made for my boat.  It's luff length 
is 51' 2.5".  I had it cut slightly short so that it would ride slightly above 
the deck and lifelines.  Thus, Ron's sails measuring at 51' 5" would mate with 
my furler just fine.  I believe that the second sail with a 52' luff would need 
to be flown without the furler drum or swivel (or both).
Josh MuckleyS/V Sea Hawk1989 C&C 37+Solomons, MD



On Tue, Jun 19, 2018, 1:50 PM Ron Ricci via CnC-List <cnc-list@cnc-list.com> 
wrote:

I have two jibs that I don’t use and will give them to anyone willing to pick 
them up in Annapolis, MD.  Below are links to photos and specs for each sail.·  
     98% Kevlar Jib - https://1drv.ms/f/s!AhpB-lul9d5YrkeG82Ht0IpjLOc5o   Luff 
= 51'-5"o   Foot = 15'-8"o   Leach = 49'·       155% Light Kevlar Genoa - 
https://1drv.ms/f/s!AhpB-lul9d5YrkZsSamLMQtUGi1yo   Luff = 52'o   Foot = 
24'-9"o   Leach = 50'-6"I took these sails to Bacon Sails last March and after 
several inquiries they finally said the sails had no value because supposedly 
they were de-laminating.  When I left the sails off, the preliminary inspection 
did not show any delamination nor did I see any when the photos were taken.  It 
is not practical for me to pick up the sails and it would be a shame to dispose 
of them.  I’d feel much better if someone could put them to good use (or at 
least store them in their attic).   Please contact me off line ASAP if you are 
interested.  I will make arrangements so you can pick up one or both.  
Thanks,RonRon RicciS/V PatriotC&C 37+Bristol, 
riron.ri...@1968.usna.com_______________________________________________

Thanks everyone for supporting this list with your contributions.  Each and 
every one is greatly appreciated.  If you want to support the list - use PayPal 
to send contribution --   https://www.paypal.me/stumurray



_______________________________________________

Thanks everyone for supporting this list with your contributions.  Each and 
every one is greatly appreciated.  If you want to support the list - use PayPal 
to send contribution --  https://www.paypal.me/stumurray



   
_______________________________________________

Thanks everyone for supporting this list with your contributions.  Each and 
every one is greatly appreciated.  If you want to support the list - use PayPal 
to send contribution --   https://www.paypal.me/stumurray

Reply via email to