This is what our main looks like after just dropping it, without taking any time to zip the cover shut or to put the separate front cover on (similar to Josh's setup).
https://4.bp.blogspot.com/-vcTap2SToF8/WlARaGxmTCI/AAAAAAABqLU/8OJ_WtmY6JkgY7o6zOjQfjyXcRM2G92mACLcBGAs/s1600/IMG_2574%2BSalazar.jpg This is what it looks like zipped up and with the front cover on as well: https://4.bp.blogspot.com/-U-z3eISLNhQ/WlAUw3PY9WI/AAAAAAABqMY/te2nqCik-GUjlHJoZvQPfRKgWtKgWLoqwCPcBGAYYCw/s1600/20130811_Salazar%2Bat%2BBen%2BEoin%2BMarina_0030.JPG Ken H. On 16 May 2018 at 20:04, Josh Muckley via CnC-List <cnc-list@cnc-list.com> wrote: > I have a sail pack custom made by my sail maker - Clark McKinney at > Quantum Sails in Solomons, MD. It makes packing the sail quite simple but > be warned, the boom height can still make zipping the pack and flaking down > the sail a bit awkward. I shopped around to various sail makers and off > the shelf products and finally decided on the customizations afforded by > using a local canvas maker. Had I done it myself with the existing lazy > jacks my lead would have come off the mast too low and too narrow. I have > a tides marine strong track with 5 battons so the stack height had to be > carefully accounted for. > > I was also involved with the design of the forward part of the pack > cover. Some have a large flap that wraps around the front of the mast and > zips into the opposite side. I didn't like the unanswerable question of > what happens to this flap during the sail? Another design option (better > but not great) is to have the flap unzip on both sides of the pack allowing > it to be removed completely during sail use. I was concerned about > potential chafe of the zippers on the sail and mast. The sail maker took > my suggestion and built a short sail cover. It works like a normal cover > and goes on top of the closed sail pack, its just short. It extends about > 2 or 3 feet down the boom. It finishes off and protects the leading edge > of the pack and sail and also protects the head board of the sail. > > Since then the same sailmaker has further experimented and has developed a > schrunchie elasticated area that automatically closes the leading edge of > the pack with no other action required by the user. > > Get with me off list and I can provide pictures, costs, and contact info. > > Josh Muckley > S/V Sea Hawk > 1989 C&C 37+ > Solomons, MD > > > > On Wed, May 16, 2018, 2:10 PM Edd Schillay via CnC-List < > cnc-list@cnc-list.com> wrote: > >> Listers, >> >> Has anyone installed a Stack Pack (http://www.doylesails.com/ >> stackpack/index.html) or similar? Pros? Cons? >> >> All the best, >> >> Edd >> >> >> Edd M. Schillay >> Starship Enterprise >> C&C 37+ | Sail No: NCC-1701-B >> City Island, NY >> Starship Enterprise's Captain's Log <http://enterpriseb.blogspot.com/> >> >> >> >> >> >> >> >> _______________________________________________ >> >> Thanks everyone for supporting this list with your contributions. Each >> and every one is greatly appreciated. If you want to support the list - >> use PayPal to send contribution -- https://www.paypal.me/stumurray >> >> > _______________________________________________ > > Thanks everyone for supporting this list with your contributions. Each > and every one is greatly appreciated. If you want to support the list - > use PayPal to send contribution -- https://www.paypal.me/stumurray > > >
_______________________________________________ Thanks everyone for supporting this list with your contributions. Each and every one is greatly appreciated. If you want to support the list - use PayPal to send contribution -- https://www.paypal.me/stumurray