Wow, thanks for all the insight on my halyard question, I really appreciate the help.
Being new to sailing, I think it would be very easy for me to pick an inferior product with drastic effects in unsavory weather, so again, thanks. Tom Power<http://aka.ms/weboutlook> Invictus C&C 30 MK1 Fredericton, NB ________________________________ From: CnC-List <cnc-list-boun...@cnc-list.com> on behalf of Nauset Beach via CnC-List <cnc-list@cnc-list.com> Sent: Sunday, December 10, 2017 7:37:27 PM To: cnc-list@cnc-list.com Cc: Nauset Beach Subject: Re: Stus-List new haylards A consideration: If you have self tailing winches, the 8 mm may not hold in the winch and you have to hand tail. A single person trying to grind the winch and tailing at the same time can be a challenge. I have self tailing Barient 24’s for halyard winches and the 8 mm will not stay in the “jaws” of the self tailer. They are adjusted as small as they can go. May just be my winches… Brian From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Dennis C. via CnC-List Sent: Sunday, December 10, 2017 3:28 PM To: CnClist <cnc-list@cnc-list.com> Cc: Dennis C. <capt...@gmail.com> Subject: Re: Stus-List new haylards With cover, 8mm would be my thought. To go smaller, I'd consider stripped Dyneema. Maybe 1/4 inch. Dennis C. On Sun, Dec 10, 2017 at 1:52 PM, Jim via CnC-List <cnc-list@cnc-list.com<mailto:cnc-list@cnc-list.com>> wrote: Dennis Thanks for the info and pictures. Your set up looks like what I'm trying to achieve. When you say a small diameter high tech halyard should work, what diameter where you thinking? I purchased 8mm VPC (but have not tried it). I'm reluctant to go much smaller as it may be hard to hold / pull on. Thanks again for the pictures, I am going to take a closer look at my end to see what is possible. Cheers, James ps: my 35-1 is s/n 75 so very close to yours.
_______________________________________________ Thanks everyone for supporting this list with your contributions. Each and every one is greatly appreciated. If you want to support the list - use PayPal to send contribution -- https://www.paypal.me/stumurray
