Paul — they must have changed them at some point. See the photos I took when I
changed these out in 2005:
http://www.postaudio.net/webserver/lf38hatches.html
<http://www.postaudio.net/webserver/lf38hatches.html>
Another good reason I didn’t drill out the holes when I had the lenses
fabricated (apparently a reason I forgot…).
— Fred
Fred Street -- Minneapolis
S/V Oceanis (1979 C&C Landfall 38) -- on the hard in Bayfield, WI :^(
On Dec 6, 2015, at 6:17 PM, s/v Johanna Rose via CnC-List
<cnc-list@cnc-list.com <mailto:cnc-list@cnc-list.com>> wrote:
> Fred,
>
> All of my hinges have one hole. The break occurred between the hole and the
> hinge joint. I have posted additional photos on my blog but no write up yet.
>
> I checked Wally’s site(our hulls are two numbers off), and it looks like his
> hinges are like mine with one big hole through the acrylic for each hinge.
> The latch on the other hand has two holes.
>
> Maybe around 1981, they changed the hinge?
>
>
> Here is the direct link to Wally’s page:
> http://www.wbryant.com/StellaBoat/Projects/deck/hatch/index.htm
> <http://www.wbryant.com/StellaBoat/Projects/deck/hatch/index.htm>
>
>
> Thanks again for you input.
>
> -
> Paul E.
> 1981 C&C 38 Landfall
> S/V Johanna Rose
> Carrabelle, FL
>
> http://svjohannarose.blogspot.com/ <http://svjohannarose.blogspot.com/>
_______________________________________________
Email address:
CnC-List@cnc-list.com
To change your list preferences, including unsubscribing -- go to the bottom of
page at:
http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com
