Or you drove 30 mins to rigger and 60 mins in Million Dollar Saloon in Mississauga? :)
> On May 14, 2015, at 09:25, Stevan Plavsa via CnC-List <cnc-list@cnc-list.com> > wrote: > > I had the rod off yesterday and the coil fit in my car. Oh the wonders of > driving an old station wagon, I love my car. I drove 1.5 hours each way to > leave the rigging at the shop. > > Steve > Suhana, C&C 32 > Toronto > > >> On Wed, May 13, 2015 at 5:40 PM, Chuck S via CnC-List >> <cnc-list@cnc-list.com> wrote: >> .25" rod diameter x 200 = 50 inches or 4' 2" diameter circle. When I had my >> headstay done, I made an X using 1 x 4, and made the coil about 5 ft around. >> Fit easily on the roof racks of my car, and I drove the 2 1/2 hrs to the >> rigger to save time and talk about options and give him a check to start >> work. >> >> >> >> Chuck >> Resolute >> 1990 C&C 34R >> Broad Creek, Magothy River, Md >> >> From: "Dennis C. via CnC-List" <cnc-list@cnc-list.com> >> To: cnc-list@cnc-list.com >> Cc: "Dennis C." <capt...@gmail.com> >> Sent: Wednesday, May 13, 2015 12:56:10 PM >> Subject: Re: Stus-List Rig - crack? >> >> Navtec recommends coiling no less than 200 times diameter. >> >> Dennis C. >> >> Sent from my iPhone >> >> On May 13, 2015, at 10:35 AM, Stevan Plavsa via CnC-List >> <cnc-list@cnc-list.com> wrote: >> >> No idea. Rigger is over an hour away. As it stands now he's asked me to ship >> him the upper and lower so that he can ensure the new fitting fits with the >> rest of the rig. 3' to 4' coils is what was recommended, which sounds tight >> to me but he's the expert so I trust him. I'll be off to the boat to collect >> the two pieces of rod after work today, then straight to purolator. >> >> This must be some kind of sign .. I think that Neptune is telling me to move >> my boat to Georgian bay. I bet I can get it trucked up there by the time >> that rod is ready. I'm already paid up for the season though so I guess I'de >> be a fool to do it. Georgian bay is calling though. One can only sail to the >> thousand islands so many times (two and three week trips both of the past >> two years, time to start spending vacation time a little differently). >> >> Steve >> Suhana, C&C 32 >> Toronto >> >> >> >> >> >> >> _______________________________________________ >> >> Email address: >> CnC-List@cnc-list.com >> To change your list preferences, including unsubscribing -- go to the bottom >> of page at: >> http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com > > _______________________________________________ > > Email address: > CnC-List@cnc-list.com > To change your list preferences, including unsubscribing -- go to the bottom > of page at: > http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com >
_______________________________________________ Email address: CnC-List@cnc-list.com To change your list preferences, including unsubscribing -- go to the bottom of page at: http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com
