I had the rod off yesterday and the coil fit in my car. Oh the wonders of driving an old station wagon, I love my car. I drove 1.5 hours each way to leave the rigging at the shop.
Steve Suhana, C&C 32 Toronto On Wed, May 13, 2015 at 5:40 PM, Chuck S via CnC-List <cnc-list@cnc-list.com > wrote: > .25" rod diameter x 200 = 50 inches or 4' 2" diameter circle. When I had > my headstay done, I made an X using 1 x 4, and made the coil about 5 ft > around. Fit easily on the roof racks of my car, and I drove the 2 1/2 hrs > to the rigger to save time and talk about options and give him a check to > start work. > > > > Chuck > Resolute > 1990 C&C 34R > Broad Creek, Magothy River, Md > > ------------------------------ > *From: *"Dennis C. via CnC-List" <cnc-list@cnc-list.com> > *To: *cnc-list@cnc-list.com > *Cc: *"Dennis C." <capt...@gmail.com> > *Sent: *Wednesday, May 13, 2015 12:56:10 PM > *Subject: *Re: Stus-List Rig - crack? > > Navtec recommends coiling no less than 200 times diameter. > > Dennis C. > > Sent from my iPhone > > On May 13, 2015, at 10:35 AM, Stevan Plavsa via CnC-List < > cnc-list@cnc-list.com> wrote: > > No idea. Rigger is over an hour away. As it stands now he's asked me to > ship him the upper *and* lower so that he can ensure the new fitting fits > with the rest of the rig. 3' to 4' coils is what was recommended, which > sounds tight to me but he's the expert so I trust him. I'll be off to the > boat to collect the two pieces of rod after work today, then straight to > purolator. > > This must be some kind of sign .. I think that Neptune is telling me to > move my boat to Georgian bay. I bet I can get it trucked up there by the > time that rod is ready. I'm already paid up for the season though so I > guess I'de be a fool to do it. Georgian bay is calling though. One can only > sail to the thousand islands so many times (two and three week trips both > of the past two years, time to start spending vacation time a little > differently). > > Steve > Suhana, C&C 32 > Toronto > > > > > > > _______________________________________________ > > Email address: > CnC-List@cnc-list.com > To change your list preferences, including unsubscribing -- go to the > bottom of page at: > http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com > > >
_______________________________________________ Email address: CnC-List@cnc-list.com To change your list preferences, including unsubscribing -- go to the bottom of page at: http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com
