The blue wire on Raymarine 4000 autopilots is the -V for the power supply. I suggest you track down whoever told you to hook it up like that and beat him senseless. Read the manuals for each, it isn't rocket science.
Jim Watts Paradigm Shift C&C 35 Mk III Victoria, BC On 13 January 2014 05:04, Curtis <cpt.b...@gmail.com> wrote: > Got it all wired in today and I need some help. > I have an older model Autohelm St4000 and a new Echo50s Garmin.\I have the > blue wire from the control head going to the blue wire on the Garmin I have > the red wire to the inst switch and a common ground to the batt. > I have the baud rate set to 4800. > Here goes the dumbest question I have asked. > > How do I get it to steer the boat? The st400 when in gauged will respond > to the control head. How do I get it to steer a course? > > Thanks so much for your help. one other question. IO have a transducer at > the top of my mast with App and True Wind / Wind Speed, I have a gauge that > I want to use in one location but I want the information to go into the > Garmin as well.It will take the information according to the instruction I > just don't know how to get all of the inputs in the one last remaining > brown wire on the garmin? > > > Thanks again for your help > > -- > > *At sea, I learned how little a person needs, not how much. - Robin Lee > Graham* > > > _______________________________________________ > This List is provided by the C&C Photo Album > http://www.cncphotoalbum.com > CnC-List@cnc-list.com > >
_______________________________________________ This List is provided by the C&C Photo Album http://www.cncphotoalbum.com CnC-List@cnc-list.com
