I always thought the 34R hull was made from kevlar.....am I wrong?

Bob Abbott
AZURA
C&C 32 - 84
Halifax, N.S.

On 2013/10/10 11:40 AM, Hoyt, Mike wrote:
34R was made by a completely different company than the 99. I believe was also not epoxy.

------------------------------------------------------------------------
*From:* CnC-List [mailto:cnc-list-boun...@cnc-list.com] *On Behalf Of *dwight veinot
*Sent:* Thursday, October 10, 2013 11:33 AM
*To:* cnc-list@cnc-list.com
*Subject:* Re: Stus-List Looking to upsize.

Mike

The new hulls are stiff but they hole through a lot easier than the hull of an older C&C which has solid glass reinforced polyester...Once saw a power boat in slow reverse with the ss swim ladder supports pointing aft...go too close to a 34R and there was a hole through the hull...rather easy to puncture I thought


On Wed, Oct 9, 2013 at 10:25 AM, Hoyt, Mike <mike.h...@impgroup.com <mailto:mike.h...@impgroup.com>> wrote:

    Curtis

    Not really sure how the hulls are weaker.  They are not made with
    solid
    polyester based resin layup though.  The C&C 99 is laid up using Epoxy
    not polyester so in many respects could be considered stronger ..
    Or if
    not stronger than certainly lighter for the equivalent amount of
    strength?

    Speaking of Beneteaus.  The Beneteau 367 sails well for racing and
    has a
    huge interior for entertaining or cruising.  Is priced about the
    same as
    a C&C99 on the used market

    Mike

    -----Original Message-----
    From: CnC-List [mailto:cnc-list-boun...@cnc-list.com
    <mailto:cnc-list-boun...@cnc-list.com>] On Behalf Of
    Curtis
    Sent: Wednesday, October 09, 2013 10:12 AM
    To: cnc-list@cnc-list.com <mailto:cnc-list@cnc-list.com>
    Subject: Re: Stus-List Looking to upsize.

    The 99 has a weaker hull than the C&C boats? Right

    On 10/9/13, Hoyt, Mike <mike.h...@impgroup.com
    <mailto:mike.h...@impgroup.com>> wrote:
    > There is a 99 one for sale in Nova Scotia.  Google Scotia Coast
    Yachts.
    >
    > Have sailed on a 99 numerous times.  Is a great boat.
    >
    > Mike
    > ________________________________
    >
    > From: CnC-List [mailto:cnc-list-boun...@cnc-list.com
    <mailto:cnc-list-boun...@cnc-list.com>] On Behalf Of
    Marek
    > Fluder
    > Sent: Tuesday, October 08, 2013 10:16 PM
    > To: cnc-list@cnc-list.com <mailto:cnc-list@cnc-list.com>
    > Subject: Re: Stus-List Looking to upsize.
    >
    >
    > I am opened for C&C 99 but there are few and far between.
    > As for 33-II the admiral would prefer something newer than the 80's,
    > which I do not oppose :)
    > Kind regards,
    >
    > Marek
    >
    >
    >
    > Sent from my iPad
    >
    > On 2013-10-08, at 11:33 AM, "Richard N. Bush" <bushma...@aol.com
    <mailto:bushma...@aol.com>>
    wrote:
    >
    >
    >
    >       If you're looking at the 320, why not look at the C&C 99?
     or a
    > nice 33-II ?
    >
    >
    >
    >
    >       Richard
    >       1987 33-II, Ohio River, Mile 584
    >
    >


_______________________________________________
This List is provided by the C&C Photo Album
http://www.cncphotoalbum.com
CnC-List@cnc-list.com

Reply via email to