Resolute
1990 C&C 34R
Atlantic City, NJ
From: "Bill Coleman" <colt...@verizon.net>
To: cnc-list@cnc-list.com
Sent: Monday, August 19, 2013 6:15:15 PM
Subject: Re: Stus-List New sheets/halyards
I bought a spool of 10 mm T-900 from NER for halyards, they work good and I don’t notice any stretch. It is hard to pull at the mast with bare hands, though. (I try not to do that, much) On the other hand, I would not want anything fatter for up – the – mast stuff.
Incidentally, this main halyard broke my Lewmar clutch. Maybe because there is no give in it, don’t know, but we just discovered the plastic release handle is broken. I am sending Lewmar a picture and see if they think it is something they should fix or not.
Bill Coleman
C&C 39 
From: CnC-List
[mailto:cnc-list-boun...@cnc-list.com] On Behalf Of cenel...@aol.com
Sent: Monday, August 19, 2013 5:37 PM
To: cnc-list@cnc-list.com
Subject: Stus-List New sheets/halyards
My crew has convinced me that I need to replace my regular sheets and halyards--some have been spliced/end for ended, etc. and its been probably 5+ years that they have been in use. For convenience, I like to use the same line and color for my jib and main halyards and the jib sheets. The main sheet is probably OK but I think it is just something like Sta-Set.
I need something which will work on the Lewmar clutches on my C&C 36 XL/kcb Water Phantom so in spite of the increased strength of modern lines, I doubt I can go below 3/8" or 5/16" and still have the clutches usable.
I thought I would ask the list for its opinion--I am thinking of something medium tech/price for club racing locally and of buying an entire spool of whatever I get if it saves me some money on $/foot.
I have used the usual tricks to extend the life (end for ended, taken the covers off, used messenger lines to keep the exposed core hidden in the mast/boom, etc.) so what I am looking for is a good deal on some good, not professional, low stretch line. I now use (I am pretty sure) Endura Braid from NER and in spite of its 11,000 lbs breaking strength, I have had it break at least twice in use--probably because it had been worn at some points when it was in use. This line also 'hockles' easily and the cover is a little slippery.
Of course it should have a reasonable 'hand' as well.
Suggestions of line type and vendors are welcome.
Thanks,
Charlie Nelson
Water Phantom
C&C 36 XL/kcb
cenel...@aol.com
_______________________________________________
This List is provided by the C&C Photo Album
http://www.cncphotoalbum.com
CnC-List@cnc-list.com
_______________________________________________ This List is provided by the C&C Photo Album http://www.cncphotoalbum.com CnC-List@cnc-list.com
