You may prefer a whole new boat when you see the quotes.
On 26 June 2013 18:36, Chuck S <cscheaf...@comcast.net> wrote: > Damien, > Check Edson.com > You will find a catalogue showing several systems and several sized > quadrants as diameter effects operation. I believe they will bore the > right diameter quadrant to any diameter shaft, so measure the diameter of > the quadrant and the diameter of your shaft and call them. > > Naturally, check condition of cable, chain, gears, idler pulleys, etc, > because something else may have stressed the quadrant and caused the > failure. Replace anything suspect. You may prefer a whole new system when > you see the new design options? > > > Chuck > Resolute > 1990 C&C 34R > Atlantic City, NJ > ------------------------------ > *From: *"Damien Morrissey" <morrissey.dam...@gmail.com> > *To: *cnc-list@cnc-list.com > *Sent: *Tuesday, June 25, 2013 7:50:23 AM > *Subject: *Stus-List Steering Quadrant > > > The problem is definitely the Quadrant. It has snapped into 2 pieces > from the shaft across to the curved grooved part that holds the steering > cable, the bolts are NOT missing. > > I can not find any name or product numbers in the pieces to aid in > ordering the proper part from Edson or others. My camera crapped out > yesterday so I will try again to get some pics. It is cast aluminum or > white metal of some sort. > > It is generally a pie shaped part with a hole for the rudder post at one > end. This end is in 2 pieces to clamp around that rudder post.There are 4 > bolts to hold this together. It is about 6 1/2 inches across here with 2 > eye bolts to attach the steering cable ends. The piece is about 10 inches > from the rudder post end to the centre of the curved groove end. The > curved end has 2 grooves for the steering cable and is about 12 1/2 inches > across. It is about 1 1/2 thick. > > As a picture is worth a thousand words, I will cut the description here > and post a pic as soon as I can. Until then, if anyone can help, that > would be great. If it isn't an Edson part - who else could be the > manufacturer ? > > > Damien > "Melissa Anne" > Viking 33 - C&C Design > Bay of Islands Yacht Club > Corner Brook, NL > > _______________________________________________ > This List is provided by the C&C Photo Album > http://www.cncphotoalbum.com > CnC-List@cnc-list.com > > _______________________________________________ > This List is provided by the C&C Photo Album > http://www.cncphotoalbum.com > CnC-List@cnc-list.com > > -- Jim Watts Paradigm Shift C&C 35 Mk III Victoria, BC
_______________________________________________ This List is provided by the C&C Photo Album http://www.cncphotoalbum.com CnC-List@cnc-list.com
