It probably looks similar to one of these. http://www.edsonmarine.com/marinestore/images/categories/quadrant.jpg
It really doesn't matter who made it, Edson can supply a replacement quadrant as long as you have the *exact* dimensions of the rudder shaft. On 25 June 2013 06:03, Dennis C. <capt...@yahoo.com> wrote: > Some older C&C/Hinterhoeller boats used Morch steering. Moot point since > Morch is long gone. > > Dennis C. > Touche' 35-1 #83 > Mandeville, LA > > ------------------------------ > *From:* Richard N. Bush <bushma...@aol.com> > *To:* cnc-list@cnc-list.com > *Sent:* Tuesday, June 25, 2013 7:11 AM > *Subject:* Re: Stus-List Steering Quadrant > > Given the vintage, it is likely a Cinkel product, not Edson; > Richard > 1987 33-II; Ohio River, mile 584 > > > Richard N. Bush Law Offices > 235 South Fifth Street, Fourth Floor > Louisville, Kentucky 40202 > 502-584-7255 > -----Original Message----- > From: Damien Morrissey <morrissey.dam...@gmail.com> > To: cnc-list <cnc-list@cnc-list.com> > Sent: Tue, Jun 25, 2013 7:50 am > Subject: Stus-List Steering Quadrant > > The problem is definitely the Quadrant. It has snapped into 2 pieces > from the shaft across to the curved grooved part that holds the steering > cable, the bolts are NOT missing. > > I can not find any name or product numbers in the pieces to aid in > ordering the proper part from Edson or others. My camera crapped out > yesterday so I will try again to get some pics. It is cast aluminum or > white metal of some sort. > > It is generally a pie shaped part with a hole for the rudder post at one > end. This end is in 2 pieces to clamp around that rudder post.There are 4 > bolts to hold this together. It is about 6 1/2 inches across here with 2 > eye bolts to attach the steering cable ends. The piece is about 10 inches > from the rudder post end to the centre of the curved groove end. The > curved end has 2 grooves for the steering cable and is about 12 1/2 inches > across. It is about 1 1/2 thick. > > As a picture is worth a thousand words, I will cut the description here > and post a pic as soon as I can. Until then, if anyone can help, that > would be great. If it isn't an Edson part - who else could be the > manufacturer ? > > > Damien > "Melissa Anne" > Viking 33 - C&C Design > Bay of Islands Yacht Club > Corner Brook, NL > > _______________________________________________ > This List is provided by the C&C Photo > Albumhttp://www.cncphotoalbum.comcnc-l...@cnc-list.com > > > _______________________________________________ > This List is provided by the C&C Photo Album > http://www.cncphotoalbum.com > CnC-List@cnc-list.com > > > > _______________________________________________ > This List is provided by the C&C Photo Album > http://www.cncphotoalbum.com > CnC-List@cnc-list.com > > -- Jim Watts Paradigm Shift C&C 35 Mk III Victoria, BC
_______________________________________________ This List is provided by the C&C Photo Album http://www.cncphotoalbum.com CnC-List@cnc-list.com
