Given the vintage, it is likely a Cinkel product, not Edson;
Richard 1987 33-II; Ohio River, mile 584 Richard N. Bush Law Offices 235 South Fifth Street, Fourth Floor Louisville, Kentucky 40202 502-584-7255 -----Original Message----- From: Damien Morrissey <morrissey.dam...@gmail.com> To: cnc-list <cnc-list@cnc-list.com> Sent: Tue, Jun 25, 2013 7:50 am Subject: Stus-List Steering Quadrant The problem is definitely the Quadrant. It has snapped into 2 pieces from the shaft across to the curved grooved part that holds the steering cable, the bolts are NOT missing. I can not find any name or product numbers in the pieces to aid in ordering the proper part from Edson or others. My camera crapped out yesterday so I will try again to get some pics. It is cast aluminum or white metal of some sort. It is generally a pie shaped part with a hole for the rudder post at one end. This end is in 2 pieces to clamp around that rudder post.There are 4 bolts to hold this together. It is about 6 1/2 inches across here with 2 eye bolts to attach the steering cable ends. The piece is about 10 inches from the rudder post end to the centre of the curved groove end. The curved end has 2 grooves for the steering cable and is about 12 1/2 inches across. It is about 1 1/2 thick. As a picture is worth a thousand words, I will cut the description here and post a pic as soon as I can. Until then, if anyone can help, that would be great. If it isn't an Edson part - who else could be the manufacturer ? Damien "Melissa Anne" Viking 33 - C&C Design Bay of Islands Yacht Club Corner Brook, NL _______________________________________________ This List is provided by the C&C Photo Album http://www.cncphotoalbum.com CnC-List@cnc-list.com
_______________________________________________ This List is provided by the C&C Photo Album http://www.cncphotoalbum.com CnC-List@cnc-list.com
