I wipe down the interior wood with Pinesol, diluted as instructed and kept in a hand sprayer. The process removes stains and any mildew and some finish, so I wipe on a light coat of Watco Teak Oil (Home Depot) to even out the color. Gives the boat a nice fresh new smell and looks great.
Chuck Resolute 1990 C&C 34R Atlantic City, NJ ----- Original Message ----- From: "dwight veinot" <dwightvei...@hfx.eastlink.ca> To: cnc-list@cnc-list.com Sent: Tuesday, April 23, 2013 12:53:33 PM Subject: Re: Stus-List Burma Teak Oil Joel I found that if you do your exterior teak with any type of oil you will have to clean and redo at least yearly, if you don’t mind the grey look the wood will last a long time grey. I maintain a golden finish on the exterior teak I used Cetol marine which has lasted fine for 5 years now, some parts exposed to weather during winter…5 coats on a totally cleaned surface when the rails were off the boat. For interior teak I now prefer lemon oil because the Deftoil soaked in really good so I only need to clean and brightened it and lemon oil which is much lighter oil and easier to apply works fine…I brighten my interior teak with lemon oil at the start of every season…that’s it I am happy til next year Dwight Veinot C&C 35 MKII, Alianna Head of St. Margaret's Bay, NS From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Joel Aronson Sent: April 23, 2013 1:30 PM To: cnc-list@cnc-list.com Subject: Re: Stus-List Burma Teak Oil I used Deks last year. The wood had not been treated in years so it soaked it in. I need to reapply. It gave the wood a rich glow until it disappeared Joel Aronson On Apr 23, 2013, at 12:12 PM, dwight veinot < dwightvei...@hfx.eastlink.ca > wrote: I have use Deftoil marine teak wood finish available at Lee Valley http://www.leevalley.com/en/wood/page.aspx?p=45090&cat=1,190,42942 but I prefer lemon oil Dwight Veinot C&C 35 MKII, Alianna Head of St. Margaret's Bay, NS From: CnC-List [ mailto:cnc-list-boun...@cnc-list.com ] On Behalf Of Josh Muckley Sent: April 23, 2013 12:57 PM To: cnc-list@cnc-list.com Subject: Re: Stus-List Burma Teak Oil I don't know about Burma teak oil but a product I really like is Danish Oil. You can get it in colors but I just go with natural. It has real lite varnish in it which helps it last longer and protect better. Put it on thick enough that it shines and let it sit 15 min. Re-apply. After an additional 15 min wipe off the excess. Looks like a hand rubbed oil finish but last more than one season. Josh Muckley S/V Sea Hawk -- When security matters. http://www.secure-my-email.com On Apr 23, 2013 11:47 AM, "Stephen Thorne" < stephenltho...@gmail.com > wrote: Guys I read a thread a few months ago about interior teak finishing and the thread spoke of a product called Burma Teak Oil (BTO) which apparently doesn't mildew/turn dark as tung oil will after a while. Any one using this stuff now? I searched online and could not find it anywhere. _______________________________________________ This List is provided by the C&C Photo Album http://www.cncphotoalbum.com CnC-List@cnc-list.com No virus found in this message. Checked by AVG - www.avg.com Version: 2012.0.2241 / Virus Database: 3162/5767 - Release Date: 04/23/13 <blockquote> _______________________________________________ This List is provided by the C&C Photo Album http://www.cncphotoalbum.com CnC-List@cnc-list.com </blockquote> No virus found in this message. Checked by AVG - www.avg.com Version: 2012.0.2241 / Virus Database: 3162/5767 - Release Date: 04/23/13 _______________________________________________ This List is provided by the C&C Photo Album http://www.cncphotoalbum.com CnC-List@cnc-list.com
_______________________________________________ This List is provided by the C&C Photo Album http://www.cncphotoalbum.com CnC-List@cnc-list.com
