Bob,

Muffler shops have an expansion device to make steel pipes larger in
diameter.  That might do the trick.  AutoZone loans out tools like this too.
You just need to "pre-stretch" the hose to get it over the lip.

Jake


Jake Brodersen
C&C 35 Mk-III
Midnight Mistress
Hampton VA



-----Original Message-----
From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Robert
Abbott
Sent: Wednesday, April 10, 2013 5:35 PM
To: cnc-list@cnc-list.com
Subject: Stus-List Question

Background on the question......replaced the muffler and mixing elbow
today.....first time for me doing this job, second time for my mentor who
assisted....he was the more experienced at these tasks, thank god....got to
the last part of the job and ran into the old saying, there are no easy
jobs..... couldn't get the 2" hose to the muffler on the mixing elbow end
....the mixing elbow has a small 'lip' that is the challenge.....went on
easy over the lip on the new Vernalift muffler....worked on it until I
called quit.....put on liquid dish detergent .... heat gun .....put the hose
in hot water....close but close doesn't count....can't get enough leverage
to push it up over the lip of the mixing elbow....really frustrating.

Before someone says do you have the correct hose size....yes...2" hard wall
marine hose came off..... the same is going on.....I had to cut the old one
off on the mixing elbow side.

A smart guy, which I wasn't today, would have put the mixing elbow side hose
on in the vice grip on the work bench and not when you are on your side in
the engine compartment with little to no leverage. Mixing elbow is not
coming off going back to the workbench to get his hose on even if I have to
go to a slightly bigger hose.

I need some really innovative ideas to stretch the 2" hose to get it 
over the end of the mixing elbow.     Don't tell me to use soap, heat, 
hot water.....tried all of those today.....I need a really innovative
solution...

There is no problem that can't be overcome......help me please!

Bob Abbott
AZURA
C&C 32 - 84
Halifax, N.S.


_______________________________________________
This List is provided by the C&C Photo Album http://www.cncphotoalbum.com
CnC-List@cnc-list.com


_______________________________________________
This List is provided by the C&C Photo Album
http://www.cncphotoalbum.com
CnC-List@cnc-list.com

Reply via email to