So what happened? Rich Knowles Indigo. LF38 Halifax
On 2013-02-28, at 14:07, "Terry" <tj...@comcast.net> wrote: Hi, I would like to thank everyone for their comments regarding the water pump issue. It was very helpful...Terry Johnson From: Bill Coleman Sent: Thursday, February 28, 2013 5:53 AM To: cnc-list@cnc-list.com Subject: Re: Stus-List Water Pump delayed start Is it possible that the water is leaking back to the tank, so it has to fill the lines again, possibly even re-priming the pump? Bill Coleman C&C 39 <image001.gif> From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Andrew Burton Sent: Wednesday, February 27, 2013 9:13 PM To: cnc-list@cnc-list.com Subject: Re: Stus-List Water Pump delayed start I had that problem on a Swan I used to deliver; you turn on the faucet then wait for the water. ..drove me up the wall, but never did figure out what was the problem. Maybe a good idea to call Jabsco and talk to a tech, they must have had that problem before. When you find out, please share with us. Andy C&C 40 Peregrine On Wed, Feb 27, 2013 at 8:31 PM, Joel Aronson <joel.aron...@gmail.com> wrote: Terry, Is the problem that the motor does not come on or that it comes on but no water comes out? Joel Sent from my iPad On Feb 27, 2013, at 7:05 PM, Terry <tj...@comcast.net> wrote: Model # 12884557 From: Rich Knowles Sent: Wednesday, February 27, 2013 3:40 PM To: cnc-list@cnc-list.com Subject: Re: Stus-List Water Pump delayed start There are a number of versions of this pump including some automatic. What is the precise model number, please! Rich Knowles Indigo. LF38 Halifax On 2013-02-27, at 19:24, "Terry" <tj...@comcast.net> wrote: It is a Jabsco par-max plus 12 volt. From: Rich Knowles Sent: Wednesday, February 27, 2013 2:56 PM To: cnc-list@cnc-list.com Subject: Re: Stus-List Water Pump delayed start What is the make and model? Rich Knowles Indigo. LF38 Halifax On 2013-02-27, at 18:48, "Terry" <tj...@comcast.net> wrote: Hello, I have just installed a new fresh water pump. The new pump does not come on right way as it is supposed to, instead it takes 15 to 45 seconds for it to start. I thought it was a faulty pressure switch so I took the first new pump back and installed a second new pump. The same problem occurs. Any suggestions as to what the problem may be?? Terry Johnson S/V Ozymandias E-mail: tj...@comcast.net Website: www.tj622.com _______________________________________________ This List is provided by the C&C Photo Album http://www.cncphotoalbum.com CnC-List@cnc-list.com _______________________________________________ This List is provided by the C&C Photo Album http://www.cncphotoalbum.com CnC-List@cnc-list.com Terry Johnson S/V Ozymandias E-mail: tj...@comcast.net Website: www.tj622.com _______________________________________________ This List is provided by the C&C Photo Album http://www.cncphotoalbum.com CnC-List@cnc-list.com _______________________________________________ This List is provided by the C&C Photo Album http://www.cncphotoalbum.com CnC-List@cnc-list.com Terry Johnson S/V Ozymandias E-mail: tj...@comcast.net Website: www.tj622.com _______________________________________________ This List is provided by the C&C Photo Album http://www.cncphotoalbum.com CnC-List@cnc-list.com _______________________________________________ This List is provided by the C&C Photo Album http://www.cncphotoalbum.com CnC-List@cnc-list.com -- Andrew Burton 61 W Narragansett Ave Newport, RI USA 02840 http://sites.google.com/site/andrewburtonyachtservices/ phone +401 965 5260 _______________________________________________ This List is provided by the C&C Photo Album http://www.cncphotoalbum.com CnC-List@cnc-list.com Terry Johnson S/V Ozymandias E-mail: tj...@comcast.net Website: www.tj622.com _______________________________________________ This List is provided by the C&C Photo Album http://www.cncphotoalbum.com CnC-List@cnc-list.com
_______________________________________________ This List is provided by the C&C Photo Album http://www.cncphotoalbum.com CnC-List@cnc-list.com
