Mark:
If your oil filter screws into the side of the engine, here's what I do
when removing the old one. Take a newspaper and place it so that the
top of the paper is directly under the oil filter and fold it a little
until the bottom of the paper has been placed in a container (1 quart
ice cream works great)..at about a 45 deg. angle. The idea is that as
you unscrew the oil filter, the oil will drop to the paper and run
directly into the plastic container and not all over the engine and
engine compartment. When you have removed the filter from the engine,
slide it down the paper as well to the container. Dump oil from the
filter into the container and then the old oil to your larger recycle
oil container.
Bob Abbott
AZURA
C&C 32 - 84
Halifax, N.S.
On 2012/11/14 5:44 PM, Mark Meyer wrote:
Robert and Jonathon, and all,
Thanks for the tips; are there suggestions about best practices when
doing oil changes on the 34?
Mark
_______________________________________________
This List is provided by the C&C Photo Album
http://www.cncphotoalbum.com
CnC-List@cnc-list.com
