3-4 minutes your pump is very slow mine puts at least 4 L through per minute I am surprised that you dont have a cooling problem
Dwight Veinot C&C 35 MKII, Alianna Head of St. Margaret's Bay, NS _____ From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of D.Drake Sent: October 20, 2012 8:04 AM To: cnc-list@cnc-list.com Subject: Re: Stus-List Winterizing a 2GM20F Sebastion That's pretty much how I go about it with the exception that I have crew monitor the bucket of antifreeze to ensure that it never goes dry . It takes my SB 8 Yanmar about 3-4 minutes to start spewing antifreeze out of the exhaust . at which point I stop the engine . The next step is to open the cooling circuit drain on the right (Portside) side of the engine to ensure that antifreeze is past the thermostat .The important thing is to get as much water out of the internal engine circuits as possible and fill it with antifreeze On 19/10/2012 10:53 AM, Sébastien Lemieux wrote: I'll be winterizing my 2GM20F for the first time tomorrow (saturday) and would like some advices on the practical way to fill up the raw water circuit with antifreeze. I plan on detaching the intake tube of the raw water circuit from the seacock and putting it in a bucket filled with antifreeze (I'm aiming for 2 gallons, is that enough?). Then, I assume I need to start up the engine and wait until antifreeze comes out from the exhaust thruhull. Should I just crank up the engine (with decompression lever open)? If I need to start the engine, how long should I expect to it? Do you leave the tube in the bucket unattended while you stand near the control panel to stop the engine? Thanks in advance! Sébastien Lemieux Merlot X - C&C 30 mk2 1987 Mooney Bay - Lake Champlain _______________________________________________ This List is provided by the C&C Photo Album http://www.cncphotoalbum.com CnC-List@cnc-list.com -- D.Drake 73 Jensen Healey C&C 26 _____ No virus found in this message. Checked by AVG - www.avg.com Version: 2012.0.2221 / Virus Database: 2441/5341 - Release Date: 10/19/12
_______________________________________________ This List is provided by the C&C Photo Album http://www.cncphotoalbum.com CnC-List@cnc-list.com
